Hi, The OpenMesh AA2 AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
This update contains:
* add of the antenna gain
* CTLs for DFS channels
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a QCA4019 based module (based on qcom-ipq4019-ap.dk01.1)
- one QCA4019 radio is used as 2.4GHz radio
- one QCA4019 radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- it was created by the ODM and QCA for the OpenMesh A42
- was provided by the ODM to OpenMesh for this product (this includes
distribution)
- it is the latest release from 2018-11-28
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42
md5sum: d9690f7937509e920ed070702262a585
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42
md5sum: 9a670abb62c7348dfbf70fe706323e2f
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Sven
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42.bin
Description: Binary data
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
