Sven Eckelmann <[email protected]> writes: > The OpenMesh AA2 AP requires two special BDFs to get the Wi-Fi PHYs working > (correctly). The bmi-board-id='s would clash with one of the the IPQ401X > AP-DK boards because QCA doesn't provide special IDs for customers and seems > to use the AP-DK board-ids in the wifi firmware to change its behavior. > > This update contains: > > * add of the antenna gain > * CTLs for DFS channels > > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a QCA4019 based module (based on qcom-ipq4019-ap.dk01.1) > - one QCA4019 radio is used as 2.4GHz radio > - one QCA4019 radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - it was created by the ODM and QCA for the OpenMesh A42 > - was provided by the ODM to OpenMesh for this product (this includes > distribution) > - it is the latest release from 2018-11-28 > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42 > md5sum: d9690f7937509e920ed070702262a585 > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42 > md5sum: 9a670abb62c7348dfbf70fe706323e2f > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Thanks, added to QCA4019/hw1.0/board-2.bin: New: Changed: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42 bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42 Deleted: 0 board image(s) added, 2 changed, 0 deleted, 41 in total https://github.com/kvalo/ath10k-firmware/commit/93a59a9c2deb8e29cb75ecef801987483c04e748 -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
