I believe someone recently submitted a patch that defined noise floors
per band (2/5).
Can't say I'm a fan of the hacky code, in particular the if/else for
min/max // maybe abs(a-b)?
if (e40 != 0x80) { // whats this case about?
Are there reasons to not use log?
On Tue, Dec 17, 2019 at 7:59 AM Sebastian Gottschall
<[email protected]> wrote:
>
>
> >> currently debugging in your code, but i already have seen that the
> >> values are wrong now for this chipset
> >
> > Thanks for testing. I'll add a check for 0 and ignore that value
> > too. That seem OK?
> i tested already the 0 check and it works
> >
> > Were the per-chain values OK?
> on 9984 i see no disadvantage so far. seem to work and the values look
> sane. i will do a side by side comparisation later this day on 9984
> >
> > Thanks,
> > Ben
> >
> >>>
> >>> Am 16.12.2019 um 23:07 schrieb [email protected]:
> >>>> From: Ben Greear <[email protected]>
> >>>>
> >>>> This makes per-chain RSSI be more consistent between HT20, HT40, HT80.
> >>>> Instead of doing precise log math for adding dbm, I did a rough
> >>>> estimate,
> >>>> it seems to work good enough.
> >>>>
> >>>> Tested on ath10k-ct 9984 firmware.
> >>>>
> >>>> Signed-off-by: Ben Greear <[email protected]>
> >>>> ---
> >>>> drivers/net/wireless/ath/ath10k/htt_rx.c | 64
> >>>> ++++++++++++++++++++---
> >>>> drivers/net/wireless/ath/ath10k/rx_desc.h | 3 +-
> >>>> 2 files changed, 60 insertions(+), 7 deletions(-)
> >>>>
> >>>> diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c
> >>>> b/drivers/net/wireless/ath/ath10k/htt_rx.c
> >>>> index 13f652b622df..034d4ace228d 100644
> >>>> --- a/drivers/net/wireless/ath/ath10k/htt_rx.c
> >>>> +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
> >>>> @@ -1167,6 +1167,44 @@ static bool ath10k_htt_rx_h_channel(struct
> >>>> ath10k *ar,
> >>>> return true;
> >>>> }
> >>>> +static int ath10k_sum_sigs_2(int a, int b) {
> >>>> + int diff;
> >>>> +
> >>>> + if (b == 0x80)
> >>>> + return a;
> >>>> +
> >>>> + if (a >= b) {
> >>>> + diff = a - b;
> >>>> + if (diff == 0)
> >>>> + return a + 3;
> >>>> + else if (diff == 1)
> >>>> + return a + 2;
> >>>> + else if (diff == 2)
> >>>> + return a + 1;
> >>>> + return a;
> >>>> + }
> >>>> + else {
> >>>> + diff = b - a;
> >>>> + if (diff == 0)
> >>>> + return b + 3;
> >>>> + else if (diff == 1)
> >>>> + return b + 2;
> >>>> + else if (diff == 2)
> >>>> + return b + 1;
> >>>> + return b;
> >>>> + }
> >>>> +}
> >>>> +
> >>>> +static int ath10k_sum_sigs(int p20, int e20, int e40, int e80) {
> >>>> + /* Hacky attempt at summing dbm without resorting to log(10)
> >>>> business */
> >>>> + if (e40 != 0x80) {
> >>>> + return ath10k_sum_sigs_2(ath10k_sum_sigs_2(p20, e20),
> >>>> ath10k_sum_sigs_2(e40, e80));
> >>>> + }
> >>>> + else {
> >>>> + return ath10k_sum_sigs_2(p20, e20);
> >>>> + }
> >>>> +}
> >>>> +
> >>>> static void ath10k_htt_rx_h_signal(struct ath10k *ar,
> >>>> struct ieee80211_rx_status *status,
> >>>> struct htt_rx_desc *rxd)
> >>>> @@ -1177,18 +1215,32 @@ static void ath10k_htt_rx_h_signal(struct
> >>>> ath10k *ar,
> >>>> status->chains &= ~BIT(i);
> >>>> if (rxd->ppdu_start.rssi_chains[i].pri20_mhz != 0x80) {
> >>>> - status->chain_signal[i] = ATH10K_DEFAULT_NOISE_FLOOR +
> >>>> - rxd->ppdu_start.rssi_chains[i].pri20_mhz;
> >>>> + status->chain_signal[i] = ATH10K_DEFAULT_NOISE_FLOOR
> >>>> + +
> >>>> ath10k_sum_sigs(rxd->ppdu_start.rssi_chains[i].pri20_mhz,
> >>>> + rxd->ppdu_start.rssi_chains[i].ext20_mhz,
> >>>> + rxd->ppdu_start.rssi_chains[i].ext40_mhz,
> >>>> + rxd->ppdu_start.rssi_chains[i].ext80_mhz);
> >>>> + //ath10k_warn(ar, "rx-h-sig, chain[%i] pri20: %d
> >>>> ext20: %d ext40: %d ext80: %d\n",
> >>>> + // i, rxd->ppdu_start.rssi_chains[i].pri20_mhz,
> >>>> rxd->ppdu_start.rssi_chains[i].ext20_mhz,
> >>>> + // rxd->ppdu_start.rssi_chains[i].ext40_mhz,
> >>>> rxd->ppdu_start.rssi_chains[i].ext80_mhz);
> >>>> status->chains |= BIT(i);
> >>>> }
> >>>> }
> >>>> /* FIXME: Get real NF */
> >>>> - status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
> >>>> - rxd->ppdu_start.rssi_comb;
> >>>> - /* ath10k_warn(ar, "rx-h-sig, signal: %d chains: 0x%x
> >>>> chain[0]: %d chain[1]: %d chan[2]: %d\n",
> >>>> - status->signal, status->chains,
> >>>> status->chain_signal[0], status->chain_signal[1],
> >>>> status->chain_signal[2]); */
> >>>> + if (rxd->ppdu_start.rssi_comb_ht != 0x80) {
> >>>> + status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
> >>>> + rxd->ppdu_start.rssi_comb_ht;
> >>>> + }
> >>>> + else {
> >>>> + status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
> >>>> + rxd->ppdu_start.rssi_comb;
> >>>> + }
> >>>> +
> >>>> + //ath10k_warn(ar, "rx-h-sig, signal: %d chains: 0x%x
> >>>> chain[0]: %d chain[1]: %d chain[2]: %d chain[3]: %d\n",
> >>>> + // status->signal, status->chains,
> >>>> status->chain_signal[0],
> >>>> + // status->chain_signal[1], status->chain_signal[2],
> >>>> status->chain_signal[3]);
> >>>> status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
> >>>> }
> >>>> diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h
> >>>> b/drivers/net/wireless/ath/ath10k/rx_desc.h
> >>>> index dec1582005b9..6b44677474dd 100644
> >>>> --- a/drivers/net/wireless/ath/ath10k/rx_desc.h
> >>>> +++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
> >>>> @@ -726,7 +726,8 @@ struct rx_ppdu_start {
> >>>> u8 ext80_mhz;
> >>>> } rssi_chains[4];
> >>>> u8 rssi_comb;
> >>>> - __le16 rsvd0;
> >>>> + u8 rsvd0; /* first two bits are bandwidth, other 6 are
> >>>> reserved */
> >>>> + u8 rssi_comb_ht;
> >>>> u8 info0; /* %RX_PPDU_START_INFO0_ */
> >>>> __le32 info1; /* %RX_PPDU_START_INFO1_ */
> >>>> __le32 info2; /* %RX_PPDU_START_INFO2_ */
> >>>
> >>> _______________________________________________
> >>> ath10k mailing list
> >>> [email protected]
> >>> http://lists.infradead.org/mailman/listinfo/ath10k
> >>>
> >>
> >
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
