On 12/17/19 10:29 AM, Tom Psyborg wrote:
On 17/12/2019, Ben Greear <[email protected]> wrote:
On 12/17/19 8:23 AM, Justin Capella wrote:
I believe someone recently submitted a patch that defined noise floors
per band (2/5).
I looked at using the real noise floor. Our radio was reporting a noise
floor of around -102,
where the hard-coded default is -95. This of course would make the reported
RSSI lower by 7db
in that case. I am not sure that is correct.
Hi
I am getting similar NF values with all my ath10k devices, I thought
default was changed since ath9k from -95 to -115 just like in the
vendor driver? There were some discussions about it on mailing list.
On some channels (5Ghz) the value goes down to about -107, even saw
-110 once.
If you use ath9k and ath10k on same channel/environment, do you see similar
RSSI reported (especially with the ath10k patch I just posted)?
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
