Yu Wang <[email protected]> writes: > When working in station mode, after connected to a legacy > AP, 11g only, for example, the tx bitrate is incorrect in > output of command 'iw wlan0 link'. > > That's because the legacy tx bitrate value reported by > firmware is not well handled: > For QCA6174, the value represents rate index, but treated > as a real rate; > For QCA9888, the value is real rate, with unit 'Mbps', but > treated as '100kbps'. > > To fix this issue: > 1. Translate the rate index to real rate for QCA6174; > 2. Translate the rate from 'Mbps' to 'kbps' for QCA9888. > > Tested with: > QCA6174 PCIe with firmware WLAN.RM.4.4.1.c3-00031. > QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. > QCA9888 PCIe with firmware 10.4-3.9.0.2-00040.
What about QCA988X and WCN3990, how do they behave? Does this patch break those? -- https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
