Sven Eckelmann <[email protected]> writes: > The support for this device is currently prepared for OpenWrt. This AP > requires > two special BDFs to get the Wi-Fi PHYs working (correctly). > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4019 based board > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - was provided by vendor in patch send to me for the OpenWrt support > (Sun, 27 Jan 2019 22:23:37 +0800) > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - BoardNames[0]: > 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200' > BoardLength[0]: 12064 > BoardCRC32[0]: 4993061f > BoardMD5[0]: f8727ab647005b96d83a0ab62fddb3e1 > - BoardNames[1]: > 'bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200' > BoardLength[1]: 12064 > BoardCRC32[1]: d88f99d8 > BoardMD5[1]: be3e4787cc41754c54a8aa5e76576855 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA1200 bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=PlasmaCloud-PA1200 Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 84 in total https://github.com/kvalo/ath10k-firmware/commit/ff8c56bb347ae1e8ac063a7b5dedf59178abcd1d -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
