On 04/03/2024 20:34, Conor Dooley wrote: > On Mon, Mar 04, 2024 at 05:21:37PM +0100, Marc Gonzalez wrote: > >> On 29/02/2024 19:40, Conor Dooley wrote: >> >>> On Wed, Feb 28, 2024 at 06:37:08PM +0200, Kalle Valo wrote: >>> >>>> Marc Gonzalez wrote: >>>> >>>>> As mentioned in my other reply, there are several msm8998-based >>>>> devices affected by this issue. Is it not appropriate to consider >>>>> a kernel-based work-around? >>>> >>>> Sorry, not following you here. But I'll try to answer anyway: >>>> >>>> I have understood that Device Tree is supposed to describe hardware, not >>>> software. This is why having this property in DT does not look right >>>> place for this. For example, if the ath10k firmware is fixed then DT >>>> would have to be changed even though nothing changed in hardware. But of >>>> course DT maintainers have the final say. >>> >>> I dunno, if the firmware affects the functionality of the hardware in a >>> way that cannot be detected from the operating system at runtime how >>> else is it supposed to deal with that? >>> The devicetree is supposed to describe hardware, yes, but at a certain >>> point the line between firmware and hardware is invisible :) >>> Not describing software is mostly about not using it to determine >>> software policy in the operating system. >> >> Recording here what was discussed a few days ago on IRC: >> >> If all msm8998 boards are affected, then it /might/ make sense >> to work around the issue for ALL msm8998 boards: >> >> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c >> b/drivers/net/wireless/ath/ath10k/qmi.c >> index 0776e79b25f3a..9da06da518fb6 100644 >> --- a/drivers/net/wireless/ath/ath10k/qmi.c >> +++ b/drivers/net/wireless/ath/ath10k/qmi.c >> @@ -1076,6 +1076,9 @@ int ath10k_qmi_init(struct ath10k *ar, u32 msa_size) >> qmi->ar = ar; >> ar_snoc->qmi = qmi; >> >> + if (of_device_is_compatible(of_root, "qcom,msm8998") >> + qmi->no_point_in_waiting_for_msa_ready_indicator = true; >> + >> if (of_property_read_bool(dev->of_node, "qcom,msa-fixed-perm")) >> qmi->msa_fixed_perm = true; >> >> >> Thus, anyone porting an msm8998 board to mainline would automatically >> get the work-around, without having to hunt down the feature bit, >> and tweak the FW files. > > How come the root node comes into this, don't you have a soc-specific > compatible for the integration on this SoC? > (I am assuming that this is not the SDIO variant, given then it'd not be > fixed to this particular implementation)
I see only "qcom,ipq4019-wifi" "qcom,wcn3990-wifi" "qcom,wcn6750-wifi" arch/arm64/boot/dts/qcom/msm8998.dtsi uses "qcom,wcn3990-wifi" (which is also used for 9 other SoCs). IIUC, you're saying there probably should have been a generic compatible AND a board-specific compatible, like for ufshc: $ git grep qcom,ufshc arch/arm64/boot/dts/qcom arch/arm64/boot/dts/qcom/msm8996.dtsi: compatible = "qcom,msm8996-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/msm8998.dtsi: compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; arch/arm64/boot/dts/qcom/sa8775p.dtsi: compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; arch/arm64/boot/dts/qcom/sc7280.dtsi: compatible = "qcom,sc7280-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sc8180x.dtsi: compatible = "qcom,sc8180x-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sc8280xp.dtsi: compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sc8280xp.dtsi: compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sdm845.dtsi: compatible = "qcom,sdm845-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm6115.dtsi: compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; arch/arm64/boot/dts/qcom/sm6125.dtsi: compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; arch/arm64/boot/dts/qcom/sm6350.dtsi: compatible = "qcom,sm6350-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm8150.dtsi: compatible = "qcom,sm8150-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm8250.dtsi: compatible = "qcom,sm8250-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm8350.dtsi: compatible = "qcom,sm8350-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm8450.dtsi: compatible = "qcom,sm8450-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm8550.dtsi: compatible = "qcom,sm8550-ufshc", "qcom,ufshc", arch/arm64/boot/dts/qcom/sm8650.dtsi: compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; If all msm8998-based device trees had (for example) a qcom,msm8998-wcn3990-wifi compatible, we could have matched that to apply a quirk to all msm8998 boards. Did I understand correctly? (In the toy code I provided, I matched the of_root because there is no SoC-specific compatible for the device itself.) -- Regards
