Use our own Kconfig file, we'll be expanding this shortly.
Signed-off-by: Luis R. Rodriguez <[EMAIL PROTECTED]>
---
drivers/net/wireless/Kconfig | 18 +-----------------
drivers/net/wireless/ath5k/Makefile | 8 ++++++--
2 files changed, 7 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 9b1e042..836d862 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -740,23 +740,7 @@ config P54_PCI
If you choose to build a module, it'll be called p54pci.
-config ATH5K
- tristate "Atheros 5xxx wireless cards support"
- depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
- ---help---
- This module adds support for wireless adapters based on
- Atheros 5xxx chipset.
-
- Currently the following chip versions are supported:
-
- MAC: AR5211 AR5212
- PHY: RF5111/2111 RF5112/2112 RF5413/2413
-
- This driver uses the kernel's mac80211 subsystem.
-
- If you choose to build a module, it'll be called ath5k. Say M if
- unsure.
-
+source "drivers/net/wireless/ath5k/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
diff --git a/drivers/net/wireless/ath5k/Makefile
b/drivers/net/wireless/ath5k/Makefile
index ada1095..564ecd0 100644
--- a/drivers/net/wireless/ath5k/Makefile
+++ b/drivers/net/wireless/ath5k/Makefile
@@ -1,2 +1,6 @@
-ath5k-objs = base.o hw.o initvals.o phy.o debug.o
-obj-$(CONFIG_ATH5K) += ath5k.o
+ath5k-y += base.o
+ath5k-y += hw.o
+ath5k-y += initvals.o
+ath5k-y += phy.o
+ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o
+obj-$(CONFIG_ATH5K) += ath5k.o
--
1.5.3.7
_______________________________________________
ath5k-devel mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
