hi Rajkumar, I am using the ar9271.fw downloaded from linux-firmware git. It's 51280bytes;
Thanks &Regards Wang Min -----Original Message----- From: Rajkumar Manoharan [mailto:rmanoha...@atheros.com] Sent: Friday, November 12, 2010 5:39 PM To: Wang Min Cc: ath9k-devel@lists.ath9k.org Subject: Re: [ath9k-devel] TKIP MIC failure with netgear AP On Fri, Nov 12, 2010 at 12:26:37PM +0530, Wang Min wrote: > Hi all, > > I am using Compat-wireless-2010-11-08, and ath9k_htc driver for atheros > AR9271 USB dongle; > One strange issue is it cannot connect with NetGear AP by WPA-tkip > encryption mode; > After comparing test, if in windows XP, it can connect the same AP by > TKIP encryption(the driver is from Atheros); > Below is the log, hope somebody can give some clue: > <7>[ 1207.902854] cfg80211: All devices are disconnected, going to > restore regulatory settings > <7>[ 1207.902857] cfg80211: Restoring regulatory settings > <6>[ 1207.902868] cfg80211: Calling CRDA to update world regulatory > domain > <6>[ 1207.921478] cfg80211: World regulatory domain updated: > <6>[ 1207.921481] (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > <6>[ 1207.921484] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > <6>[ 1207.921486] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > <6>[ 1207.921488] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > <6>[ 1207.921490] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > <6>[ 1207.921492] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > <7>[ 1209.483800] wlan2: authenticate with 30:46:9a:0a:7d:49 (try 1) > <7>[ 1209.488178] wlan2: authenticated > <7>[ 1209.819297] wlan2: associate with 30:46:9a:0a:7d:49 (try 1) > <7>[ 1209.833053] wlan2: RX AssocResp from 30:46:9a:0a:7d:49 > (capab=0x411 status=0 aid=1) > <7>[ 1209.833055] wlan2: associated > <7>[ 1209.936013] wlan2: disassociated from 30:46:9a:0a:7d:49 (Reason: > 14) > <7>[ 1210.052678] wlan2: deauthenticating from 30:46:9a:0a:7d:49 by > local choice (reason=3) Please use the latest ar9271 firmware from linux-firmware git. -- Rajkumar _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel