Hi Rajkumar After long time waiting, I found the ccmp ip address can be gotten. but it's very slow. After ping the AP from pc, the packet loss rate is very high. So the reason why the network cannot work should be because the DHCP is time out. So there is my question, Do the nohwcrypt=1 is working for CCMP? If not, I guess the packet is lost in firmware because of slow/wrong packet encryption/decryption
And I have tried a laptop, it can connect by both mode; So I think It's not AP issue. And maybe it is not cooperate with other APs, even we do not know. Thanks &Regards Wang Min -----Original Message----- From: Rajkumar Manoharan [mailto:rmanoha...@atheros.com] Sent: Monday, November 15, 2010 4:19 PM To: Wang Min Cc: Rajkumar Manoharan; ath9k-devel@lists.ath9k.org Subject: Re: [ath9k-devel] TKIP MIC failure with netgear AP On Mon, Nov 15, 2010 at 12:59:46PM +0530, Wang Min wrote: > Hi Rajkumar, > Please see the log: > > Ccmp: from the log, it seems pass the 4-way handshake and build the > connection. > But the dhcp cannot work. It should mean the encryption is not correct > for the data packets Have you tried with static ip configuration? And please send tkip & ccmp log without nohwcrypt param. > > Because the WEP is good, so the RC4 should be ok in hardware module. > If the software encryption is ok for TKIP, the problem should come from > firmware. Am I right? Might be. > Original ath9k with Nohwcrypt=1 > TKIP AES TKIP AES > Netgear JWNR2000: NOK NOK OK NOK > Netgear WGU624 : OK OK OK OK > Netcor NW605+ : NOK NOK OK NOK Since both tkip and ccmp are working with Netgear WGU624, try with latest Netgear JWNR2000's firmware. Thanks, Rajkumar _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel