Hello I noticed a mismatch of modules for 2.6.19-1.2288.2.4.fc5 with ivtv 0.10.1
I installed the following packages from atrpms: kernel-2.6.19-1.2288.2.4.fc5.i686 kernel-devel-2.6.19-1.2288.2.4.fc5.i586 video4linux-kmdl-2.6.19-1.2288.2.4.fc5-20070302-78.fc5.at.i686 ivtv-0.10.1-126.fc5.at.i386 ivtv-kmdl-2.6.19-1.2288.2.4.fc5-0.10.1-126.fc5.at.i686 ivtv-firmware-20070217-13.at.noarch Using /lib/modules/2.6.19-1.2288.2.4.fc5/updates/drivers/media/video/ivtv/ivtv.ko from the video4linux-kmdl-2.6.19-1.2288.2.4.fc5-20070302-78.fc5.at.i686 and ivtv_fb error messages: ivtv: ==================== START INIT IVTV ==================== ivtv: version 1.0.0 (2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ) loading ivtv_fb: disagrees about version of symbol ivtv_vapi_result ivtv_fb: Unknown symbol ivtv_vapi_result ivtv_fb: disagrees about version of symbol ivtv_udma_alloc ivtv_fb: Unknown symbol ivtv_udma_alloc ivtv_fb: disagrees about version of symbol ivtv_udma_unmap ivtv_fb: Unknown symbol ivtv_udma_unmap ivtv_fb: disagrees about version of symbol ivtv_vapi ivtv_fb: Unknown symbol ivtv_vapi ivtv_fb: disagrees about version of symbol ivtv_udma_prepare ivtv_fb: Unknown symbol ivtv_udma_prepare ivtv_fb: disagrees about version of symbol ivtv_cards ivtv_fb: Unknown symbol ivtv_cards ivtv_fb: disagrees about version of symbol ivtv_udma_setup ivtv_fb: Unknown symbol ivtv_udma_setup ------------------- Using /lib/modules/2.6.19-1.2288.2.4.fc5/updates/drivers/media/video/ivtv.ko from ivtv-kmdl-2.6.19-1.2288.2.4.fc5-0.10.1-126.fc5.at.i686 and ivtv_fb working ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.1 (tagged release) loading ivtv: Linux version: 2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ------------------- With the above configuration I see mythtv showing up, but the picture is gray and flickering with diagonal lines. The same when I playback a recording. I tried changing the output with /usr/bin/v4l2-ctl -d /dev/video0 -o 0 /usr/bin/v4l2-ctl -d /dev/video0 -o 1 /usr/bin/v4l2-ctl -d /dev/video0 -o 2 # modprobe -v saa7127 test_image=1 produces also an unstable image. I edited /etc/modprobe.conf (this setting I didn't need for 2.6.18-1.2257.fc5 ivtv0.8) described in a recent thread install ivtv /sbin/modprobe saa7127; /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb I would appreciate any help solving this problem. Thanks for your help Hans Please find attached the two complete dmesg outputs: ivtv: ==================== START INIT IVTV ==================== ivtv: version 1.0.0 (2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ) loading ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 18 SCSI subsystem initialized USB Universal Host Controller Interface driver v3.0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 libata version 2.00 loaded. ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7805538 tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: audio processor is MSP4418 (idx 25) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 20 intel8x0_measure_ac97_clock: measured 50889 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002460 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 3-0060: TEA5767 detected. tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1) tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) i2c_adapter i2c-3: Client creation failed at 0x44 (-1) tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 3-0050: audio processor is CX25843 (idx 37) tveeprom 3-0050: decoder processor is CX25843 (idx 30) tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter ivtv1: Autodetected WinTV PVR 500 (unit #1) cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPEG (4 MB) ivtv1: Registered device video33 for encoder YUV (2 MB) ivtv1: Registered device vbi1 for encoder VBI (1 MB) ivtv1: Registered device video25 for encoder PCM audio (1 MB) ivtv1: Registered device radio1 for encoder radio tuner 3-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv2: Encoder revision: 0x02060039 tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) i2c_adapter i2c-4: Client creation failed at 0x44 (-1) cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) tveeprom 4-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 4-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 4-0050: audio processor is CX25843 (idx 37) tveeprom 4-0050: decoder processor is CX25843 (idx 30) tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter ivtv2: Correcting tveeprom data: no radio present on second unit ivtv2: Autodetected WinTV PVR 500 (unit #2) ivtv2: Registered device video2 for encoder MPEG (4 MB) ivtv2: Registered device video34 for encoder YUV (2 MB) ivtv2: Registered device vbi2 for encoder VBI (1 MB) ivtv2: Registered device video26 for encoder PCM audio (1 MB) tuner 4-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 ivtv: ==================== END INIT IVTV ==================== ivtv_fb: disagrees about version of symbol ivtv_vapi_result ivtv_fb: Unknown symbol ivtv_vapi_result ivtv_fb: disagrees about version of symbol ivtv_udma_alloc ivtv_fb: Unknown symbol ivtv_udma_alloc ivtv_fb: disagrees about version of symbol ivtv_udma_unmap ivtv_fb: Unknown symbol ivtv_udma_unmap ivtv_fb: disagrees about version of symbol ivtv_vapi ivtv_fb: Unknown symbol ivtv_vapi ivtv_fb: disagrees about version of symbol ivtv_udma_prepare ivtv_fb: Unknown symbol ivtv_udma_prepare ivtv_fb: disagrees about version of symbol ivtv_cards ivtv_fb: Unknown symbol ivtv_cards ivtv_fb: disagrees about version of symbol ivtv_udma_setup ivtv_fb: Unknown symbol ivtv_udma_setup lirc_dev: IR Remote Control driver registered, at major 61 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture cx2388x v4l2 driver version 0.0.6 loaded lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 ------------------------------------------------------------------------------------- ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.1 (tagged release) loading ivtv: Linux version: 2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. intel8x0_measure_ac97_clock: measured 50850 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 16 eth0: RealTek RTL8139 at 0xe01b4000, 00:40:f4:51:87:32, IRQ 16 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 18 USB Universal Host Controller Interface driver v3.0 e100: eth1: e100_probe: addr 0xfc500000, irq 18, MAC addr 00:0B:CD:BE:0E:BB ivtv0: Autodetected Hauppauge card (cx23415 based) ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfc480000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02060039 ivtv0: Decoder revision: 0x02020023 tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7805538 tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: audio processor is MSP4418 (idx 25) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-350 tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: Registered device video16 for decoder MPEG (1 MB) ivtv0: Registered device vbi8 for decoder VBI (1 MB) ivtv0: Registered device vbi16 for decoder VOUT ivtv0: Registered device video48 for decoder YUV (1 MB) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 21 ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 3-0060: TEA5767 detected. tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1) tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) i2c_adapter i2c-3: Client creation failed at 0x44 (-1) tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 3-0050: audio processor is CX25843 (idx 37) tveeprom 3-0050: decoder processor is CX25843 (idx 30) tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter ivtv1: Autodetected WinTV PVR 500 (unit #1) cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPEG (4 MB) ivtv1: Registered device video33 for encoder YUV (2 MB) ivtv1: Registered device vbi1 for encoder VBI (1 MB) ivtv1: Registered device video25 for encoder PCM audio (1 MB) ivtv1: Registered device radio1 for encoder radio tuner 3-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 22 ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv2: Encoder revision: 0x02060039 tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) i2c_adapter i2c-4: Client creation failed at 0x44 (-1) cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) tveeprom 4-0050: Hauppauge model 23559, rev D591, serial# 8201932 tveeprom 4-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 4-0050: audio processor is CX25843 (idx 37) tveeprom 4-0050: decoder processor is CX25843 (idx 30) tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter ivtv2: Correcting tveeprom data: no radio present on second unit ivtv2: Autodetected WinTV PVR 500 (unit #2) ivtv2: Registered device video2 for encoder MPEG (4 MB) ivtv2: Registered device video34 for encoder YUV (2 MB) ivtv2: Registered device vbi2 for encoder VBI (1 MB) ivtv2: Registered device video26 for encoder PCM audio (1 MB) tuner 4-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002440 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ivtv: ==================== END INIT IVTV ==================== ivtv0-fb: Framebuffer at 0xed510000, mapped to 0xe1010000, size 1665k ivtv0-fb: === Validated display mode === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB Console: switching to colour frame buffer device 90x36 ivtv0-fb: === Display mode change === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB ivtv0-fb: Running in compatibility mode. Display resize & mode change disabled ivtv0-fb: Framebuffer registered on ivtv card id 0 lirc_dev: IR Remote Control driver registered, at major 61 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture cx2388x v4l2 driver version 0.0.6 loaded lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 ivtv0-fb: === Validated display mode === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB ivtv0-fb: === Display mode change === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB ivtv0-fb: === Validated display mode === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB ivtv0-fb: === Validated display mode === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB ivtv0-fb: === Display mode change === ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp ivtv0-fb: Display position 1,1 ivtv0-fb: Display filter : on ivtv0-fb: Color space : RGB ivtv0: Stereo mode changed _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
