On Mon, Mar 12, 2007 at 10:30:11PM +0100, Walter Bleicher wrote: > Hello > > I noticed a mismatch of modules for 2.6.19-1.2288.2.4.fc5 with ivtv 0.10.1 > > I installed the following packages from atrpms: > > kernel-2.6.19-1.2288.2.4.fc5.i686 > kernel-devel-2.6.19-1.2288.2.4.fc5.i586 > video4linux-kmdl-2.6.19-1.2288.2.4.fc5-20070302-78.fc5.at.i686 > ivtv-0.10.1-126.fc5.at.i386 > ivtv-kmdl-2.6.19-1.2288.2.4.fc5-0.10.1-126.fc5.at.i686 > ivtv-firmware-20070217-13.at.noarch > > > Using > /lib/modules/2.6.19-1.2288.2.4.fc5/updates/drivers/media/video/ivtv/ivtv.ko > from the video4linux-kmdl-2.6.19-1.2288.2.4.fc5-20070302-78.fc5.at.i686 > and ivtv_fb error messages:
Pick the older video4linux kmdl. The newer one has its own copy of ivtv which doesn't really work with any app yet due to the changed API. :/ > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 1.0.0 (2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ) > loading > > ivtv_fb: disagrees about version of symbol ivtv_vapi_result > ivtv_fb: Unknown symbol ivtv_vapi_result > ivtv_fb: disagrees about version of symbol ivtv_udma_alloc > ivtv_fb: Unknown symbol ivtv_udma_alloc > ivtv_fb: disagrees about version of symbol ivtv_udma_unmap > ivtv_fb: Unknown symbol ivtv_udma_unmap > ivtv_fb: disagrees about version of symbol ivtv_vapi > ivtv_fb: Unknown symbol ivtv_vapi > ivtv_fb: disagrees about version of symbol ivtv_udma_prepare > ivtv_fb: Unknown symbol ivtv_udma_prepare > ivtv_fb: disagrees about version of symbol ivtv_cards > ivtv_fb: Unknown symbol ivtv_cards > ivtv_fb: disagrees about version of symbol ivtv_udma_setup > ivtv_fb: Unknown symbol ivtv_udma_setup > > > ------------------- > Using /lib/modules/2.6.19-1.2288.2.4.fc5/updates/drivers/media/video/ivtv.ko > from ivtv-kmdl-2.6.19-1.2288.2.4.fc5-0.10.1-126.fc5.at.i686 > and ivtv_fb working > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.10.1 (tagged release) loading > ivtv: Linux version: 2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS > > ------------------- > With the above configuration I see mythtv showing up, but the picture is gray > and flickering with diagonal lines. The same when I playback a recording. > I tried changing the output with > /usr/bin/v4l2-ctl -d /dev/video0 -o 0 > /usr/bin/v4l2-ctl -d /dev/video0 -o 1 > /usr/bin/v4l2-ctl -d /dev/video0 -o 2 > > # modprobe -v saa7127 test_image=1 > produces also an unstable image. > > I edited /etc/modprobe.conf (this setting I didn't need for 2.6.18-1.2257.fc5 > ivtv0.8) described in a recent thread > install ivtv /sbin/modprobe saa7127; /sbin/modprobe --ignore-install ivtv; > /sbin/modprobe ivtv-fb > > I would appreciate any help solving this problem. > > Thanks for your help > Hans > > Please find attached the two complete dmesg outputs: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 1.0.0 (2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ) > loading > ivtv0: Autodetected Hauppauge card (cx23415 based) > ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 18 > SCSI subsystem initialized > USB Universal Host Controller Interface driver v3.0 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > libata version 2.00 loaded. > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02060039 > ivtv0: Decoder revision: 0x02020023 > tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7805538 > tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 2-0050: audio processor is MSP4418 (idx 25) > tveeprom 2-0050: decoder processor is SAA7115 (idx 19) > tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter > ivtv0: Autodetected Hauppauge WinTV PVR-350 > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) > saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) > msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and > autoselect > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Registered device video16 for decoder MPEG (1 MB) > ivtv0: Registered device vbi8 for decoder VBI (1 MB) > ivtv0: Registered device vbi16 for decoder VOUT > ivtv0: Registered device video48 for decoder YUV (1 MB) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 20 > intel8x0_measure_ac97_clock: measured 50889 usecs > intel8x0: clocking to 48000 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002440 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002460 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv1: Encoder revision: 0x02060039 > tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) > tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 3-0060: TEA5767 detected. > tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1) > tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) > i2c_adapter i2c-3: Client creation failed at 0x44 (-1) > tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201932 > tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, > type 62) > tveeprom 3-0050: audio processor is CX25843 (idx 37) > tveeprom 3-0050: decoder processor is CX25843 (idx 30) > tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter > ivtv1: Autodetected WinTV PVR 500 (unit #1) > cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) > ivtv1: Registered device video1 for encoder MPEG (4 MB) > ivtv1: Registered device video33 for encoder YUV (2 MB) > ivtv1: Registered device vbi1 for encoder VBI (1 MB) > ivtv1: Registered device video25 for encoder PCM audio (1 MB) > ivtv1: Registered device radio1 for encoder radio > tuner 3-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) > ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 > ivtv: ====================== NEXT CARD ====================== > ivtv2: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 22 > ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 6 ports detected > ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv2: Encoder revision: 0x02060039 > tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) > tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) > i2c_adapter i2c-4: Client creation failed at 0x44 (-1) > cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) > tveeprom 4-0050: Hauppauge model 23559, rev D591, serial# 8201932 > tveeprom 4-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, > type 62) > tveeprom 4-0050: audio processor is CX25843 (idx 37) > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter > ivtv2: Correcting tveeprom data: no radio present on second unit > ivtv2: Autodetected WinTV PVR 500 (unit #2) > ivtv2: Registered device video2 for encoder MPEG (4 MB) > ivtv2: Registered device video34 for encoder YUV (2 MB) > ivtv2: Registered device vbi2 for encoder VBI (1 MB) > ivtv2: Registered device video26 for encoder PCM audio (1 MB) > tuner 4-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) > ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 > ivtv: ==================== END INIT IVTV ==================== > ivtv_fb: disagrees about version of symbol ivtv_vapi_result > ivtv_fb: Unknown symbol ivtv_vapi_result > ivtv_fb: disagrees about version of symbol ivtv_udma_alloc > ivtv_fb: Unknown symbol ivtv_udma_alloc > ivtv_fb: disagrees about version of symbol ivtv_udma_unmap > ivtv_fb: Unknown symbol ivtv_udma_unmap > ivtv_fb: disagrees about version of symbol ivtv_vapi > ivtv_fb: Unknown symbol ivtv_vapi > ivtv_fb: disagrees about version of symbol ivtv_udma_prepare > ivtv_fb: Unknown symbol ivtv_udma_prepare > ivtv_fb: disagrees about version of symbol ivtv_cards > ivtv_fb: Unknown symbol ivtv_cards > ivtv_fb: disagrees about version of symbol ivtv_udma_setup > ivtv_fb: Unknown symbol ivtv_udma_setup > lirc_dev: IR Remote Control driver registered, at major 61 > bttv: driver version 0.9.17 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > cx2388x v4l2 driver version 0.0.6 loaded > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > lirc_dev: lirc_register_plugin: sample_rate: 10 > > > ------------------------------------------------------------------------------------- > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.10.1 (tagged release) loading > ivtv: Linux version: 2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > intel8x0_measure_ac97_clock: measured 50850 usecs > intel8x0: clocking to 48000 > ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 16 > eth0: RealTek RTL8139 at 0xe01b4000, 00:40:f4:51:87:32, IRQ 16 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 18 > USB Universal Host Controller Interface driver v3.0 > e100: eth1: e100_probe: addr 0xfc500000, irq 18, MAC addr 00:0B:CD:BE:0E:BB > ivtv0: Autodetected Hauppauge card (cx23415 based) > ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 19 > ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfc480000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02060039 > ivtv0: Decoder revision: 0x02020023 > tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7805538 > tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38) > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 2-0050: audio processor is MSP4418 (idx 25) > tveeprom 2-0050: decoder processor is SAA7115 (idx 19) > tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter > ivtv0: Autodetected Hauppauge WinTV PVR-350 > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) > saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) > msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and > autoselect > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Registered device video16 for decoder MPEG (1 MB) > ivtv0: Registered device vbi8 for decoder VBI (1 MB) > ivtv0: Registered device vbi16 for decoder VOUT > ivtv0: Registered device video48 for decoder YUV (1 MB) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 21 > ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv1: Encoder revision: 0x02060039 > tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) > tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 3-0060: TEA5767 detected. > tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1) > tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) > i2c_adapter i2c-3: Client creation failed at 0x44 (-1) > tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201932 > tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, > type 62) > tveeprom 3-0050: audio processor is CX25843 (idx 37) > tveeprom 3-0050: decoder processor is CX25843 (idx 30) > tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter > ivtv1: Autodetected WinTV PVR 500 (unit #1) > cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) > ivtv1: Registered device video1 for encoder MPEG (4 MB) > ivtv1: Registered device video33 for encoder YUV (2 MB) > ivtv1: Registered device vbi1 for encoder VBI (1 MB) > ivtv1: Registered device video25 for encoder PCM audio (1 MB) > ivtv1: Registered device radio1 for encoder radio > tuner 3-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) > ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 > ivtv: ====================== NEXT CARD ====================== > ivtv2: Autodetected Hauppauge card (cx23416 based) > ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 22 > ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv2: Encoder revision: 0x02060039 > tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) > tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) > i2c_adapter i2c-4: Client creation failed at 0x44 (-1) > cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) > tveeprom 4-0050: Hauppauge model 23559, rev D591, serial# 8201932 > tveeprom 4-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom > 0x74) > tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, > type 62) > tveeprom 4-0050: audio processor is CX25843 (idx 37) > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter > ivtv2: Correcting tveeprom data: no radio present on second unit > ivtv2: Autodetected WinTV PVR 500 (unit #2) > ivtv2: Registered device video2 for encoder MPEG (4 MB) > ivtv2: Registered device video34 for encoder YUV (2 MB) > ivtv2: Registered device vbi2 for encoder VBI (1 MB) > ivtv2: Registered device video26 for encoder PCM audio (1 MB) > tuner 4-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) > ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002440 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ivtv: ==================== END INIT IVTV ==================== > ivtv0-fb: Framebuffer at 0xed510000, mapped to 0xe1010000, size 1665k > ivtv0-fb: === Validated display mode === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > Console: switching to colour frame buffer device 90x36 > ivtv0-fb: === Display mode change === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0-fb: Running in compatibility mode. Display resize & mode change disabled > ivtv0-fb: Framebuffer registered on ivtv card id 0 > lirc_dev: IR Remote Control driver registered, at major 61 > bttv: driver version 0.9.17 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > cx2388x v4l2 driver version 0.0.6 loaded > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > lirc_dev: lirc_register_plugin: sample_rate: 10 > ivtv0-fb: === Validated display mode === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0-fb: === Display mode change === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0-fb: === Validated display mode === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0-fb: === Validated display mode === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0-fb: === Display mode change === > ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0: Stereo mode changed > > > _______________________________________________ > atrpms-users mailing list > [email protected] > http://lists.atrpms.net/mailman/listinfo/atrpms-users -- Axel.Thimm at ATrpms.net
pgpRvim1oHYXM.pgp
Description: PGP signature
_______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
