> > > > The version of lirc which is broken is the x86_64. Either F8 or F9. > liblirc_client0 and lirc-devel rpms are empty (size of 5.4 KB instead of > 17KB). > > The i386 version seems to be fine (but I do not use i386). > > Certainly, Axel will rebuild the broken rpms. > > If you are using the i386 version of lirc, check which lirc is being used: > > rpm -qa | grep lirc > > Then, check the configuration files: > > /etc/sysconfig/lircd > /etc/lircd.conf > > Restart lirc: > > sudo /etc/rc.d/init.d/lircd restart > > -- > Just wanted to add that I too did the update on one of my F8 myth boxes (i386) and lirc seems broken on my system as well. I have both a serial IR connection controlled by lirc, which I use for changing the channel on my STB, and an ATI USB remote. The STB channel changing is still working, but the ATI remote is not. I was only able to do a little bit of troubleshooting, and it is possible that my issue is totally unrelated to the updates, as I have had issues with getting both devices working properly together in the past. I did unplug the USB connection and plug it back in; and the system recognized this. I rebooted my system a couple of times but it did not help. I also tried running lirc in "no daemon" mode and it did not respond to any key presses. I need to do more testing and troubleshooting before I can say for sure whether the issues are related to the update, but I figured I would report it.
John
_______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
