I am using Mythbuntu 8.04.
I have setup my lircd.conf using irrecord following the instructions
on the wiki.
Here is the behaviour I am seeing.
Start 'irw'.
Hit the Down key:
0000000087ee810d 00 Down /etc/lirc/uid14
Good.
Now hit the Menu key, until it shows up.
I see the following:
0000000087ee810d 01 Down /etc/lirc/uid14
0000000087ee810d 02 Down /etc/lirc/uid14
0000000087ee810d 03 Down /etc/lirc/uid14
0000000087ee810d 00 Down /etc/lirc/uid14
0000000087ee810d 01 Down /etc/lirc/uid14
0000000087ee8102 00 Back /etc/lirc/uid14
So, even though I am pressing a different key, lirc keeps saying I am
pressing the same key until some random amount of time or key presses.
Sometimes it just works, other times it will do it 10 times in a row,
or just once or twice.
It is getting particularly bad, so I really need to fix it.
Here is my generated lircd.conf, I had tried with the gap comment out
as well (though I am not sure what it does).
begin remote
name /etc/lirc/uid14
bits 8
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 24
pre_data 0x87EE81
gap 211981
# gap 211981
begin codes
Ok 0x04
Up 0x0B
Down 0x0D
Right 0x07
Left 0x08
Back 0x02
end codes
end remote
Has anyone seen this before?
Any settings that may change this behaviour?
Thanks,
Dave
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
-~----------~----~----~----~------~----~------~--~---
