On Mon, Oct 20, 2008 at 9:19 AM, Brian Phillips <[EMAIL PROTECTED]> wrote:
> > How long does the "no signal" last? Are you sure it's not a > screensaver/screenblanker? Mine goes "no signal" but if I press a key > on my remote, the screen will come back. > Not that I noticed, but at that time i didn't have the remote working yet. I did end up disable power management with the xset command, at least i hope so. > > You can't get sound over HDMI AFAIK. It's not supported. Your only > options are to use HDMI for video and then the RCA or Toslink > connections for the audio (I only use the RCA 2 channel audio, I've > never tried the Toslink). > Ok , when reading the howto i never came accross this part, that's what I ended up doing was HDMI and Analog sound (i left the component up for awhile and no screen). > > You can also use the component outputs (Red, Green, Blue) for video or > the composite output (on the Green) for video. Again, you have to use > either RCA or Toslink connections for audio. > > Personally, I use component video and RCA audio. On bootup, as X > loads, the screen is blank for about 60 seconds. Then the screen > suddenly appears correctly and mythfrontend is running. I think it > might be a driver issue (v 169), I've just learned to deal with it. > Oh i get the whole bootloading, once i ran the mythbuntu fixes to vesafb. > > > > On Oct 19, 12:21 pm, MacNean <[EMAIL PROTECTED]> wrote: > > On Oct 19, 12:03 pm, MacNean <[EMAIL PROTECTED]> wrote:> So i have no > sound at all. I did the post update to sound, and ran > > > alsamixer, i have master/pcm/ice985, and made sure they were all > > > unmuted. I ran mplayer against a video, and no sound. Also, no sound > > > in mythtv. > > > > OK, so i can get analog sound, i put RCA connections to the AppleTV > > and to Componet connections on my TV and sound was there. So figured, > > well if I can get sound on there, i'll just use the Components instead > > of the HDMI, but when I boot with components attached, once X starts, > > I get a no signal sent. So i can get video on one and sound on the > > other. Sigh. > > > > > Also, if the appletv sits idle forawhile the screen gets' a no signal, > > > and i have to reoobt. > > > > > Any help would be appreciated. > > > -- Sincerely, MacNean C. Tyrrell --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -~----------~----~----~----~------~----~------~--~---
