All, I solved my problem. The trick in getting the ATV to rescan the USB Ports with then 'Menu'&'-' IR transmitter is to hold it down for 6 seconds. Able to read my USB stick with both hubs now. Have ATV up and running as mythbuntu frontend!!!
On Feb 9, 7:27 am, Derek Keefe <[email protected]> wrote: > I have this same issue with my external hard drive, but never with a > flash drive. Flash drives don't consume that much power. > > Chris B wrote: > > I had the same issue but with an external drive. I had to make sure > > the external drive was powered on its own so it was ready right away > > when the ATV got power. Make sure your hub has its own external power > > supply instead of using a bus powered one. > > > On Jan 28, 2:42 pm, jh44 <[email protected]> wrote: > > >> Hello All, > > >> I have a 2GB flash drive that load atv-bootloader when connected > >> directly to the ATV. When connected through a hub (I have tried two > >> different hubs), ATV boots up the factory ATV software. I have > >> connected the the flash drive to another computer through both hubs so > >> I know that they work. > > >> Any ideas? > > --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -~----------~----~----~----~------~----~------~--~---
