great! thanks for sharing this tip.
jh44 wrote: > All, > I solved my problem. The trick in getting the ATV to rescan the USB > Ports with then 'Menu'&'-' IR transmitter is to hold it down for 6 > seconds. Able to read my USB stick with both hubs now. Have ATV up > and running as mythbuntu frontend!!! > > On Feb 9, 7:27 am, Derek Keefe <[email protected]> wrote: > >> I have this same issue with my external hard drive, but never with a >> flash drive. Flash drives don't consume that much power. >> >> Chris B wrote: >> >>> I had the same issue but with an external drive. I had to make sure >>> the external drive was powered on its own so it was ready right away >>> when the ATV got power. Make sure your hub has its own external power >>> supply instead of using a bus powered one. >>> >>> On Jan 28, 2:42 pm, jh44 <[email protected]> wrote: >>> >>>> Hello All, >>>> >>>> I have a 2GB flash drive that load atv-bootloader when connected >>>> directly to the ATV. When connected through a hub (I have tried two >>>> different hubs), ATV boots up the factory ATV software. I have >>>> connected the the flash drive to another computer through both hubs so >>>> I know that they work. >>>> >>>> Any ideas? >>>> >> > > > --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -~----------~----~----~----~------~----~------~--~---
