Did you install atv-bootloader to the internal PATA drive? It sounds like you want it to boot from the internal PATA drive, but it doesn't. You either haven't put the correct flags on your partition table or need to re-follow the directions on your page under the heading "install atv-bootloader"
http://code.google.com/p/atv-bootloader/wiki/PartitioningLinux Once the internal PATA drive has the bootloader, it can find the mythbuntu install on sdb4 and boot it. If you are still getting an error about proc/mounts not found, let me know. It's been a while since I've paid attention to what messages the bootloader should be making. On Jun 3, 8:57 pm, iitywygms <[email protected]> wrote: > Okay, updated the boot record as asked. > Still no joy. > Argh!!! > Same error!! > > On Jun 3, 7:02 am, chaogui <[email protected]> wrote: > > > On Jun 1, 4:03 am, iitywygms <[email protected]> wrote: > > > > Okay guys, I need some help > > > Been at this all weekend and still no joy. > > > I have followed this guide exactly > > > >http://code.google.com/p/atv-bootloa...titioningLinux > > > Everything goes well and no errors seen. > > > > I then follow this guide. > > > >http://code.google.com/p/atv-bootloa.../BootingLiveCD > > > I do the netboot install and all goes well. > > > > This is what I do. > > > > Boot the AppleTV using atv-bootloader and connect using telnet. Then > > > > mkdir tmp > > > > mount /dev/sdb1 tmp > > > > kexec --load tmp/linux --initrd=tmp/initrd.gz --command- > > > line="vga=normal vesa video=vesafb" > > > > kexec -e > > > > I install ubuntu, no errors noticed. I install system to partition 4 > > > and swap to 5. > > > > Now here is where I am stuck. > > > When I reboot the atv, nothing happens and the atv logo with the > > > question mark appears. > > > So I stick in the atv-bootloader usb stick and it boots to give me the > > > login prompt. > > > > I can login. I just don't know where to go from here?????? > > > How do I start linux? Should it start automatically? > > > > If I run boot_linux.sh this is what I get. > > > > boot_linux.sh > > > sda4/boot/brub menu.list found > > > /bin/bash/ > > > kexec – load /mnt/rootfs/boot/vmlinux (alot of numbers and stuff I am > > > to tired to type) > > > > kexec jump to new kernel > > > > mount proc/mounts: No such file or directory > > > mount proc/mounts: No such file or directory > > > > I have been at this all weekend and my eyes are shot. > > > Could someone please help. I really want to make this work but I am > > > bugging out and need a little help. Please > > > __________________ > > > Did you update the MBR after installation? If not, check the > > following: > > >http://code.google.com/p/atv-bootloader/wiki/UpdateMBR > > > Goog luck > > > -- > > > Chaogui --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en -~----------~----~----~----~------~----~------~--~---
