Your button names were correct before. You don't need the
"Apple_A1156" after each button name. The button definitions should
look like this:
begin
remote = Apple_A1156
prog = mythtv
button = PLUS
config = Up
repeat = 2
delay = 0
end
On Jun 8, 2009, at 12:22 AM, iitywygms wrote:
>
> Thanks for the quick reply.
> Still no joy.
>
> Here is home/kevin/.lircrc/mythtv
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = PLUS Apple_A1156
> config = Up
> repeat = 2
> delay = 0
> end
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = MINUS Apple_A1156
> config = Down
> repeat = 2
> delay = 0
> end
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = MENU Apple_A1156
> config = Escape
> repeat = 2
> delay = 0
> end
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = PLAY Apple_A1156
> config = Space
> repeat = 2
> delay = 0
> end
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = NEXT Apple_A1156
> config = Right
> repeat = 2
> delay = 0
> end
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = PREV Apple_A1156
> config = Left
> repeat = 2
> delay = 0
> end
>
> The same setup is in /home/kevin/mythtv/lircrc
>
> Here is /etc/lirc/lircd.conf
>
> #Configuration for the Apple Mac mini USB IR Receiver remote:
> #include "/usr/share/lirc/remotes/apple/lircd.conf.macmini"
>
> begin remote
>
> name Apple_A1156
> bits 8
> eps 30
> aeps 100
>
> one 0 0
> zero 0 0
> pre_data_bits 24
> pre_data 0x87EE81
> gap 211982
> toggle_bit_mask 0x0
> ignore_mask 0x0000ff01
>
> begin codes
> PLUS 0x0B
> MINUS 0x0D
> PREV 0x08
> NEXT 0x07
> PLAY 0x04
> MENU 0x02
> end codes
>
> end remote
>
> Any other ideas???
>
>
> On Jun 7, 8:52 pm, Will Koehler <[email protected]> wrote:
>> The remote name in lircrc has to match the name defined in /etc/lirc/
>> lircd.conf. irw reports the name defined in lircd.conf. In your case
>> this is "Apple_A1156".
>>
>> Change the lines in lircrc from "remote = Apple_IR" to "remote =
>> Apple_A1156" and it should work (or at least it will be closer to
>> working :)
>>
>> On Jun 7, 2009, at 11:41 PM, iitywygms wrote:
>>
>>
>>
>>> Following the guides. Everything seems cool.
>>> Here is a test
>>> ke...@mythbed:~$ irw /dev/lircd
>>> 0000000087ee810d 00 MINUS Apple_A1156
>>> 0000000087ee810d 01 MINUS Apple_A1156
>>> 0000000087ee810b 00 PLUS Apple_A1156
>>> 0000000087ee810b 01 PLUS Apple_A1156
>>
>>> That seems okay.
>>
>>> Here is part of my lircrc
>>
>>> ke...@mythbed:~/.mythtv$ tail -n30 ~/.mythtv/lircrc
>>
>>> begin
>>> remote = Apple_IR
>>> prog = mythtv
>>> button = PLAY
>>> config = Space
>>> repeat = 2
>>> delay = 0
>>> end
>>
>>> begin
>>> remote = Apple_IR
>>> prog = mythtv
>>> button = NEXT
>>> config = Right
>>> repeat = 2
>>> delay = 0
>>> end
>>
>>> begin
>>> remote = Apple_IR
>>> prog = mythtv
>>> button = PREV
>>> config = Left
>>> repeat = 2
>>> delay = 0
>>> end
>>> ke...@mythbed:~/.mythtv$
>>
>>> But NOTHING happens in mythtv??
>>> Any ideas?
>>> mythbuntu 9.04
>>
>>
> >
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
-~----------~----~----~----~------~----~------~--~---
