Thank you so much.
On Jun 7, 9:28 pm, Will Koehler <[email protected]> wrote:
> Your button names were correct before. You don't need the
> "Apple_A1156" after each button name. The button definitions should
> look like this:
>
> begin
> remote = Apple_A1156
> prog = mythtv
> button = PLUS
> config = Up
> repeat = 2
> delay = 0
> end
>
> On Jun 8, 2009, at 12:22 AM, iitywygms wrote:
>
>
>
> > Thanks for the quick reply.
> > Still no joy.
>
> > Here is home/kevin/.lircrc/mythtv
>
> > begin
> > remote = Apple_A1156
> > prog = mythtv
> > button = PLUS Apple_A1156
> > config = Up
> > repeat = 2
> > delay = 0
> > end
>
> > begin
> > remote = Apple_A1156
> > prog = mythtv
> > button = MINUS Apple_A1156
> > config = Down
> > repeat = 2
> > delay = 0
> > end
>
> > begin
> > remote = Apple_A1156
> > prog = mythtv
> > button = MENU Apple_A1156
> > config = Escape
> > repeat = 2
> > delay = 0
> > end
>
> > begin
> > remote = Apple_A1156
> > prog = mythtv
> > button = PLAY Apple_A1156
> > config = Space
> > repeat = 2
> > delay = 0
> > end
>
> > begin
> > remote = Apple_A1156
> > prog = mythtv
> > button = NEXT Apple_A1156
> > config = Right
> > repeat = 2
> > delay = 0
> > end
>
> > begin
> > remote = Apple_A1156
> > prog = mythtv
> > button = PREV Apple_A1156
> > config = Left
> > repeat = 2
> > delay = 0
> > end
>
> > The same setup is in /home/kevin/mythtv/lircrc
>
> > Here is /etc/lirc/lircd.conf
>
> > #Configuration for the Apple Mac mini USB IR Receiver remote:
> > #include "/usr/share/lirc/remotes/apple/lircd.conf.macmini"
>
> > begin remote
>
> > name Apple_A1156
> > bits 8
> > eps 30
> > aeps 100
>
> > one 0 0
> > zero 0 0
> > pre_data_bits 24
> > pre_data 0x87EE81
> > gap 211982
> > toggle_bit_mask 0x0
> > ignore_mask 0x0000ff01
>
> > begin codes
> > PLUS 0x0B
> > MINUS 0x0D
> > PREV 0x08
> > NEXT 0x07
> > PLAY 0x04
> > MENU 0x02
> > end codes
>
> > end remote
>
> > Any other ideas???
>
> > On Jun 7, 8:52 pm, Will Koehler <[email protected]> wrote:
> >> The remote name in lircrc has to match the name defined in /etc/lirc/
> >> lircd.conf. irw reports the name defined in lircd.conf. In your case
> >> this is "Apple_A1156".
>
> >> Change the lines in lircrc from "remote = Apple_IR" to "remote =
> >> Apple_A1156" and it should work (or at least it will be closer to
> >> working :)
>
> >> On Jun 7, 2009, at 11:41 PM, iitywygms wrote:
>
> >>> Following the guides. Everything seems cool.
> >>> Here is a test
> >>> ke...@mythbed:~$ irw /dev/lircd
> >>> 0000000087ee810d 00 MINUS Apple_A1156
> >>> 0000000087ee810d 01 MINUS Apple_A1156
> >>> 0000000087ee810b 00 PLUS Apple_A1156
> >>> 0000000087ee810b 01 PLUS Apple_A1156
>
> >>> That seems okay.
>
> >>> Here is part of my lircrc
>
> >>> ke...@mythbed:~/.mythtv$ tail -n30 ~/.mythtv/lircrc
>
> >>> begin
> >>> remote = Apple_IR
> >>> prog = mythtv
> >>> button = PLAY
> >>> config = Space
> >>> repeat = 2
> >>> delay = 0
> >>> end
>
> >>> begin
> >>> remote = Apple_IR
> >>> prog = mythtv
> >>> button = NEXT
> >>> config = Right
> >>> repeat = 2
> >>> delay = 0
> >>> end
>
> >>> begin
> >>> remote = Apple_IR
> >>> prog = mythtv
> >>> button = PREV
> >>> config = Left
> >>> repeat = 2
> >>> delay = 0
> >>> end
> >>> ke...@mythbed:~/.mythtv$
>
> >>> But NOTHING happens in mythtv??
> >>> Any ideas?
> >>> mythbuntu 9.04
>
>
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
-~----------~----~----~----~------~----~------~--~---
