azinck3 Wrote: > Without venturing into a cable war, I can assure you that you don't need > to buy Monster brand XLR cables for this task. Any reasonably > well-built cable will be fine. > > But...with respect to my recommendations on that site: per Hugh's > comment a few posts back I looked to see if some of the cheaper units > support a 44.1khz sample rate and many of them DON'T (including the > Tascam us-122). > > However, it appears this unit does, so maybe this is the best bet > amongst the cheap units: > http://www.sweetwater.com/store/detail/LinkUSB/ > > I've never used it so I don't want to highly recommend it, but it has > Mackie-designed preamps (Mackie's a decent name in mid-level pro-audio) > and supports the required sample rate. I haven't spent a ton of time > researching this so there could be other, even better choices out there > that I'm missing so I'd spend a little time looking before jumping in.
I believe it does. I'm looking at the product manual and it says: "Setting the Sample Rate and Bit Depth The US-122 supports sample rates of 44.1kHz and 48kHz. In the Audio Control Panel, select the pull-down menu for Sample Rate and select either 44.1 kHz or 48 kHz." Link to manual is here: http://www.tascam.com/Products/US-122/US122_Eng.pdf Please feel free to correct me if I am wrong. -- GreenMan My computer -> SB2-> Krell KAV-300i -> Thiel CS2 ------------------------------------------------------------------------ GreenMan's Profile: http://forums.slimdevices.com/member.php?userid=1173 View this thread: http://forums.slimdevices.com/showthread.php?t=24519 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
