Skunk;185815 Wrote: > Shouldn't that top lug on the PEM be connected to a part of the case > where you have sanded down to bare metal? Also, in a two part enclosure > both halves should be connected to the safety ground IIRC. [i don't have > a reference and am not a tech]
yes, that would be the proper way, but i was lazy and in a rush, and my friend has a really bad ground loop problem in his old apartment building so he would have lifted it anyway. although i did account for this somewhat... chassis ground is tied to circuit ground through 100 ohms in parallel with 0.1uF. i tested continuity on both halves of the case, and there is sufficient conductivity (via the tapped screws) that separately tying grounds is not necessary. -- dorkus ------------------------------------------------------------------------ dorkus's Profile: http://forums.slimdevices.com/member.php?userid=3373 View this thread: http://forums.slimdevices.com/showthread.php?t=19822 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
