That 15dB suckout at 650kHz should be quite audible. Do you have access to the Alan Parsons Soundcheck CD? The 1/3rd octave sweeps should show that up if it's actually there.
I notice that there is a lot of HF roll-off, corrected and uncorrected - is that right? You're way down at 10kHz... I would expect this system to sound rather "dull". Normally (IMHO) you'd aim to be say 3-6dB down at 16kHz. I guess this is a bit of a minefield, but if everything was working correctly I'd expect the measured response to be much closer to the predicted curve than it appears to be on the chart. Certainly wouldn't expect to see those big notches. Does anyone have both TACT and Inguz? It might be interesting to compare both the measured response and corrected curves for the same system. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... ...SB3+TACT+Altmann+MF DACXV3/Linn tri-amped Aktiv 5.1 system and some very expensive cables ;o) ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=35615 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
