opaqueice;291976 Wrote: 
> I think Sean was probably referring to the "doesn't bode well" part of
> your post when he said it was wrong.  Read the second paragraph of the
> wiki article you linked to.
> 
Well I think NewBuyer had it right: you want maximum voltage across the
target but I wanted to hear Sean's explanation.


> 
> Reconcile what?  In both cases the source impedance is much lower than
> the load's, as it should be.
> 
TP (100 ohms) into Amp (10k ohms) vs Amp output (~4 ohms) into speakers
(~4 ohms).  In one case the impedance is not matched in the other it is.
I assume this is because the speaker is a physical transducer and you'd
need maximum power transfer but again I'd like to hear a designer's
perspective.

> 
> If in addition the input impedance isn't purely resistive and varies
> with frequency (which is certainly the case for speakers), the effects
> of the voltage divider will be frequency dependent and would seriously
> distort the sound... unless the output impedance is much less than the
> load resistance.

Yes, this is a whole 'nother matter - LC effects.  Not really wanting
to get into that at this time for my purposes.

Another thing I was curious about.  I've heard that pre-amps are needed
because often preamp DACs and volume controlled CD players, etc., don't
have the output power suitable for a power amp input and that a preamp
is needed.  

I want to use the TP as a pre-amp and avoid buying a separate pre-amp. 
That's why I'm asking these questions.  Although it's good information I
don't really want to hear "other's are doing it"... I like to know what
the pros and cons are from a technical perspective.  An MC402 by itself
is pricey and if I've got to buy a pre-amp too then I've got to take
that into account for my budget.

regards, David


-- 
wireless200
------------------------------------------------------------------------
wireless200's Profile: http://forums.slimdevices.com/member.php?userid=11887
View this thread: http://forums.slimdevices.com/showthread.php?t=46347

_______________________________________________
audiophiles mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/audiophiles

Reply via email to