Phil Leigh;356276 Wrote: > Having spent a happy few hours now playing about with this test rig I've > come to some interesting conlusions: >
Phil, I did a similar test between a Transporter and SB3 with my TacT a year ago and have a couple of suggestions. 1) Plug the SB3 stock power supply into a switchable power strip and switch it off when listening to the second SB3. There's a good chance that the SMPS is feeding RF back into the AC circuit and contaminating the power to the other components. 2) Try toslink instead of coax between the SB3s and TacT, or, alternatively, disconnect the coax from the SB3 you aren't auditioning. With both SB3s connected to the TacT via conductive cables, there could be a cross-feed of electrical noise from one SB3 to the other. Regards, Kim -- krochat ------ Acourate -> Inguz DSP -> SB3 -> GW Labs DSP (96kHz upsampler) -> Apogee Big Ben -> TacT RCS 2.2X -> 2x TacT S2150 -> Vandersteen 3a Signature + TacT W210 ------------------------------------------------------------------------ krochat's Profile: http://forums.slimdevices.com/member.php?userid=6579 View this thread: http://forums.slimdevices.com/showthread.php?t=54197 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
