Themis;378213 Wrote: > The problem is not whether there are differences between 44.1 and 96 > sampling rates. From the dacs' perspective theses differences are > obvious and measurable withing the audible frequency range. > > The problem is that most people don't care about these differences.
below Nyquist (44.1/2) there will be no difference at either sampling frequency. So for example, a 10Khz sine wave will be identical at 44.1/16 or 96/16. The difference is that at 96/16 you could capture a 48Khz sine wave. I agree that most people don't care about the difference in sampling frequency. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...SB3+Stontronics PSU - Altmann JISCO/UPCI - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods)- Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Kimber & Chord cables Outdoors: Boombox+Creative Sub (If I remember to turn it on...) ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=57413 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
