mr-b;396822 Wrote: > Heh - yes I know enough to suspect that wasn't exactly a typical > scenario. The lack of 4mm to phono RCA adapters on ebay is enough to > raise some doubts. ;-) > > But it remains that using ADM to do this particular type of measurement > is mentioned several times e.g. measuring speaker cable differences, so > there must be a method. I guess using a mic and ADC is one way of going > back to line level but that introduces several more elements e.g. room > response into the equation. Unless of course all that gets "diffed" > out.
Phew! all you need is in the help file... but proceed with caution. The mic+adc method would work but is not very accurate. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB3 wired + Stontronics PSU - TACT 2.2X (Linear PSU) + Good Vibrations S/W - Altmann JISCO - MF Triplethreat(Audiocom full mods)- Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans,Kimber & Chord cables Outdoors: Boom ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=60041 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
