Rodney_Gold;484794 Wrote: > So if im using a DEQ2496 (I use either a Z-sys RDP-1 or a DEQ in the > efects loop) I should be using Asynchronous- external processor is > master in the effects loop clock mode? > > I have been using the synchronous setting and have noticed a distorted > effect in the DEQ - I thought it may be digital clipping , despite > reducing the gain of the DEQ prior to eq'ing. I am giving lower midbass > a very small boost with the DEQ - less than 3db
I was suggesting the other way around. If it supports the "transporter is master" mode then that would be better. But I don't know if it will work or not, I'm just guessing that it might. If the clocks are not in sync then probably what you will hear is occasional clicking caused by bit errors, like a single sample was in error here or there. Or it may be more subtle than that depending on how far apart the clocks are. By the way asynchronous (external is master) is always going to work. Synchronous is an optimization for jitter that only _might_ work. -- seanadams ------------------------------------------------------------------------ seanadams's Profile: http://forums.slimdevices.com/member.php?userid=3 View this thread: http://forums.slimdevices.com/showthread.php?t=70166 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
