Looking at the spectrum plots of the difference files, it seems that actually the big differences are in the lower frequencies. For the SB3 DAC the correlation above 280Hz is not bad, whereas it rises (worsens) sharply below that. On my MF Dac, it doesn't start to rise until below 160Hz.
Taken at face value, one might infer that the LF performance of my MF DAC is superior to the SB3 DAC... At higher frequencies the MF gets down to a min of -65dB whereas the SB3 DAC bottoms-out at circa -50dB. Fascinating. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB Touch Beta (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=72147 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
