your momo;562634 Wrote: > > I know AES & S/PDIF are very close data format, but voltage level are > also much higher with AES and I imagine that this could lead in > saturation of the input, thus not sound on some material, especially on > Toslink. >
Indeed, the voltages are completely different. However, they will always be correct on the respective interface - each has its own electronics for the driving circuit. The software setting only controls the contents of the data stream, which is sent to all ports the same. > > Good to now, so I can avoid to use my Boom on the balcony and now > listen direct form my HT/amplifier zone 2 to my outdoor speakers, even > while I keep AES data format on my TP. > Actually for the best signal you should use either of the 75Ω coax outputs. Although TP implements AES/EBU as well as possible, it is a defective specification and its only practical use is to take advantage of microphone cables you might have lying around the studio, which are terrible for this purpose. -- seanadams ------------------------------------------------------------------------ seanadams's Profile: http://forums.slimdevices.com/member.php?userid=3 View this thread: http://forums.slimdevices.com/showthread.php?t=80480 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
