tank121;634693 Wrote: > Well finally decided on stands! > > Custom Design stands ordered rs202 I think and with a custom made plate > and one column will be filled. £110.00 > > Dealer has agreed full refund on the brackets. > > The one remaining question is this, I'm going to experiment with the > positining of the speakers. They will be quite close to the stud wall > (back wall) to improve the bass. > > Once I've decided on the position do I feed the speaker cable in the > stud wall and drill back through the plaster ? The remaining speaker > cable will be concealed in the stand. > > The other end of the cable would come through the Labgear single width > cable entry exit plate and the airlocks plugged into the amp. > > Alternatively have the cable under the carpet ? This means I'll > probably be able to cut the Chord Rumour cable in half as I ordered 2 x > 4m lenghts. > Should be able to sell it on! > > Anyone interested in buying my Dynaudio audience 70 floorstanders ?
Since you are no longer using wall brackets, there is NO point in running the cable through the wall. Just run it over/under the carpet.... -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=85319
_______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
