JohnSwenson;682870 Wrote: > As to putting in a BNC jack, it certainly can be done, but make sure you > use a real 75 ohm jack, BNCs come in both 50 and 75 ohm types, the 50 > ohm types are far more prevalent than the 75 ohm types, if you just get > something that says its a BNC jack it will probably be a 50 ohm type, it > has to explicitely say its 75 ohms. > > As to the clock in the Touch being almost perfect, its not. Its a > normal cmos inverter and xtal oscillator, they are not "BAD" but they > are not great either. Its definately possible to get oscillators that > are MUCH better. And going with a better clock does significantly > improve the sound. > > > So I would say that improving the clock is actually quite a worthwhile > mode if you can do it. Unfortunately there is VERY little room in there > to do it. > > John S.
Just pulling the toslink out made a nice improvement, & unless there is a robust way to do a bnc, I'd rather skip that in fear it would make things worse ok, I thought the clock was good, my mistake-- -- sckramer CiAudio VDC-SB - Touch (TT 2.0 mods, removed toslink, disconnected screen, buf:20000) PSaudio DLIII DAC (Cullen 4 mods) - PSaudio Trio C-100 Amp (Cullen 3 mods) Energy Veritas 2.2i speakers (mundorf silver oil capacitors, inductor, and resistor mods) Martin Logan Depth i (x2) Cardas power cables - PSaudio Duet - Cardas clear light interconnect -- black cat veloce digital cable - Audioquest slate biwire spkr cables ------------------------------------------------------------------------ sckramer's Profile: http://forums.slimdevices.com/member.php?userid=20311 View this thread: http://forums.slimdevices.com/showthread.php?t=91322 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
