naamanf;690725 Wrote: > Same setup but I was using a Profire 610. I also had the same results. I > do have clipping in my log file so I am sure that's one of the problems.
To reduce the number of clipping messages in log.txt, change the gain setting in inguzdsp.exe.config: <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="dither" value="1" /> <add key="partitions" value="2" /> <add key="gain" value="-16" /> </appSettings> </configuration> Mine is set to -16... as you can see above. This eliminates 95%+ of clipping in my system. I'm not bothered about the odd clipped sample here and there, they are inaudible. However, if you are hearing "cavern" noises that implies something has gone (very) wrong with the measurement process. This is where Audiolense starts to pay for itself because: 1) it will tell you/show you if the measurement has worked properly (mic setup, gain, recording levels etc) and exactly what the results are in terms of measured frequence response 2) it will let you draw a target curve for the correction - this curve can be anything you want it to be. You can also (if you want to) restrict the range of frequencies that are subject to correction. Some people (not me) prefer to only correct the lower frequencies - say below 500Hz or even lower. The sort of room correction we are discussing here is categorically not "plug and play". It takes time, practice and attention to detail plus first-rate equipment and software to get good results. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=93393 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
