At 10:16 PM 9/07/01 +1000, you wrote:
>   Brian      The main problem I am aware of is that the mechanism on  the
>decadic rotary channel selection switches tends to wear out over time and 
>has to be replaced - finding the right switches and someone with sufficient
> patience and skill to replace them can be a problem (our current CFI has
>managed  admirably to date !).    a range of manuals for all sorts of
>avionics bits and  pieces).   The Terra company got swallowed up by Trimble
>(www.trimble.com  You never know, they might be able to help  out.  
>Regards   Jason Armistead
Jason,

The Terra transponder uses the same switches I think. I found a part in the
Farnell catalog that will fit perfectly.

I'll think about your overwrite/stop scheme for FRs. The problem probably
isn't that relevant nowadays as memory is cheap and it's probably easier to
just make it bigger. It depends how lazy people are about downloading the
recorder.

Sailplaning used to be simple - now you need a PC and a lot of technical
knowledge most of which has little to do with flying or making the glider
perform.

Given the new Etrex GPS and also the availability of a A$270 +GST data
logger (optional logging GPS altitude too)which interfaces to any GPS from
a guy in Brisbane one wonders how much longer the IGC can insist on
"approved" loggers with ridiculous and expensive security requirements to
do badges which are of interest only to the person who does them.

Mike Borgelt


Borgelt Instruments - manufacturers of quality soaring instruments
ABN 75532924542
Box 7474 Toowoomba M.C.
Queensland 4352
Australia

Tel 0746 355 784
mob 0428 355 784
    0429 355 784
fax 0746 358 796 

International  
phone:    int'l+ 61 7 46 355 784
Cellphone:int'l +61 4 28 355 784 
          int'l +61 4 29 355 784
fax  :    int'l+ 61 7 46 358 796

email: [EMAIL PROTECTED]
website:www.ozemail.com.au/~mborgelt

--
  * You are subscribed to the aus-soaring mailing list.
  * To Unsubscribe: send email to [EMAIL PROTECTED]
  * with "unsubscribe aus-soaring" in the body of the message
  * or with "help" in the body of the message for more information.

Reply via email to