Ian,
 Did you mean "tera term emulation" ?

Ron S

 

> On 7 Dec 2014, at 19:27, Ian Mc Phee <[email protected]> wrote:
> 
> This just may work for owners that have reverted back to a date now April 
> 1995.
> 
> You need to use Hyperterminal or Tetra term emulation program to communicate 
> with the logger  Set up a link baud rate of 4800, 8, none, 1
> 
> At the command line  type EXACTLY what is below with YOUR latitude longitude 
> date and time UTC.  What I have below is my lat and long in Northern NSW.  
> Also make sure logger can not pick up and satellites  (cover with metal bowl) 
> to get a command line you may have to type control C
> 
> you will then see
> cmd>                and after this EXACTLY as below (there is a space between 
> s and 2)
> 
> rgps 2835.680,S,15333.270,E,071214,221000  then enter
> 
> To explain 2835.680 means 28deg 35.680 minutes and long similar and 071214 
> means date today (UTC) and 221000 means UTC time hhmmss (or 10 past 9 eastern 
> time)
> 
> The date should revert to 12/07/14 and then turn logger off then take it 
> outside to get a view of sky and turn on again and in about 10 minutes or so 
> it should find itself and be navigating again with CORRECT DATE.
> 
> Please do not blame me as it is a Garmin Issue who nobody knew about it until 
> about 3 weeks ago.
> 
> You logger just may keep going but keep powering up regularly this season as 
> the Garman backup battery needs a good charge.
> 
> I have been told to change the internal Garmin battery (normally 3volts) as 
> all are now say 15 years old.  Of the 10 or so Garmin GPS engines I opened up 
> today one had 2.8volts another 2.3volt another 1.4volt and the rest were 0.1 
> volt   
> 
> Doing this trick may get you out of trouble for the season.  THe battery I am 
> talking about is NOT the one in the top of the logger,  It is is contained in 
> a metal case in the Garmin GPS 25 engine. 
> 
> This trick WILL NOT work with the Cambridge 302 vario logger.
> 
> I can thank Klaus Keim In Germany for working all this out.  It just may work 
> with Voltslogger - I have no idea.
> 
> Good luck becuse you will sure need it and may have to try a second time if 
> date does not change on first attempt.
>  
> Ian McPhee 
> _______________________________________________
> Aus-soaring mailing list
> [email protected]
> To check or change subscription details, visit:
> http://lists.internode.on.net/mailman/listinfo/aus-soaring

_______________________________________________
Aus-soaring mailing list
[email protected]
To check or change subscription details, visit:
http://lists.internode.on.net/mailman/listinfo/aus-soaring

Reply via email to