Hi Derek, Quite possibly, some might say exactly the same thing about the aircraft! Gliding legend Doug Robinson, (from GCV), called the short wing version a Brickaburra. Was this tongue in cheek I wonder?
I think that somewhere along the line I helped to rig a couple of LW Kookaburra's, but this is NOT an experience that lives forever in my memory! Perhaps this is a very good thing! As always, I imagine the secret to rigging this type is to have plenty of man-power, and just one person (who knows exactly how everything - glider and trailer - works), to coordinate things. I wonder what an unbiased person might say about the practically and ease of using Emilis's trailer! Does such a person still exist out there? Also, how well did this trailer tow? BTW Peter C, does your trailer match Emilis's description? Gary -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Derek Ruddock Sent: Wednesday, 8 July 2015 7:57 PM To: 'Discussion of issues relating to Soaring in Australia.' Subject: Re: [Aus-soaring] Trailer for a long wing Kookaburra Sounds hideous... -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of emilis prelgauskas Sent: Tuesday, 7 July 2015 1:04 PM To: Discussion of issues relating to Soaring in Australia. Subject: Re: [Aus-soaring] Trailer for a long wing Kookaburra I don't know where GLZ is these days. When I owned it, it had an open trailer ex Southern Cross GC. I then built an enclosed trailer which was sold on to the late Mike Valentine and John Viney. This trailer has (from memory) the tailplane in the roof, the outer wing panels side by side with root ends in the front right corner (looking from the rear open door), the fuselage with rudder at the front end diagonally across the trailer, and the centre section against the left wall with underside facing outward. The centre section is in a cradle at the front trailer end in a rolling frame, so that it can rotate horizontal once the centre section is clear of the trailer rear with its door swung out of the way. The centre section is at a height that clears the fuselage height rolling on the ground. A stand holds the external end of the horizontal centre section. This permits the fuselage to be rolled under, tilted away from the trailer side as the external stand is removed and the centre section mated at this somewhat inclined angle. Once rigged, this part airframe rolls aft away from the trailer and the other lighter parts can be carried and rigged. On 06/07/2015, at 4:04 PM, Peter Champness wrote: > We are attempting to put VH-GRN into service. The trailer is pretty > atrocious and it is a lot of trouble to unpack and to load the > glider. > > Does anyone have a trailer or have any good ideas re wing stands, > rigging aids etc. > > Peter Champness_______________________________________________ > Aus-soaring mailing list > [email protected] > To check or change subscription details, visit: > http://lists.internode.on.net/mailman/listinfo/aus-soaring _______________________________________________ Aus-soaring mailing list [email protected] To check or change subscription details, visit: http://lists.internode.on.net/mailman/listinfo/aus-soaring _______________________________________________ Aus-soaring mailing list [email protected] To check or change subscription details, visit: http://lists.internode.on.net/mailman/listinfo/aus-soaring ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6037 / Virus Database: 4365/10184 - Release Date: 07/07/15 _______________________________________________ Aus-soaring mailing list [email protected] To check or change subscription details, visit: http://lists.internode.on.net/mailman/listinfo/aus-soaring
