Hello,
I've been successfuly programming this device for several months now.
The patch is attached to this e-mail.
Just one thing though: I've noticed that most parts have common config
lines that get repeated all over the place. I opted to just clone an
existing config and modify the things I needed. Was this a good
approach? Do I really need all that stuff in there?
Examples:
flash_instr = 0xB6, 0x01, 0x11;
eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
0x99, 0xF9, 0xBB, 0xAF;
(...)
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
bytedelay = 0;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
(...)
etc ..
Cheers,
Renato
--- /etc/avrdude/avrdude.conf 2011-09-12 17:10:39.000000000 +0100
+++ avrdude.conf 2011-12-21 10:55:51.958258689 +0000
@@ -16917,3 +16917,190 @@
;
+#------------------------------------------------------------
+# ATmega32m1
+#------------------------------------------------------------
+
+part
+ id = "m32m1";
+ desc = "ATMEGA32M1";
+ has_debugwire = yes;
+ flash_instr = 0xB6, 0x01, 0x11;
+ eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00,
+ 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF,
+ 0x99, 0xF9, 0xBB, 0xAF;
+ # stk500_devcode = 0x;
+ # avr910_devcode = 0x;
+ signature = 0x1e 0x95 0x84;
+ pagel = 0xd7;
+ bs2 = 0xe2;
+ chip_erase_delay = 9000;
+ pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1",
+ "x x x x x x x x x x x x x x x x";
+
+ chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x",
+ "x x x x x x x x x x x x x x x x";
+
+ timeout = 200;
+ stabdelay = 100;
+ cmdexedelay = 25;
+ synchloops = 32;
+ bytedelay = 0;
+ pollindex = 3;
+ pollvalue = 0x53;
+ predelay = 1;
+ postdelay = 1;
+ pollmethod = 1;
+
+ pp_controlstack =
+ 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F,
+ 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F,
+ 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B,
+ 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
+ hventerstabdelay = 100;
+ progmodedelay = 0;
+ latchcycles = 5;
+ togglevtg = 1;
+ poweroffdelay = 15;
+ resetdelayms = 1;
+ resetdelayus = 0;
+ hvleavestabdelay = 15;
+ resetdelay = 15;
+ chiperasepulsewidth = 0;
+ chiperasepolltimeout = 10;
+ programfusepulsewidth = 0;
+ programfusepolltimeout = 5;
+ programlockpulsewidth = 0;
+ programlockpolltimeout = 5;
+
+ memory "eeprom"
+ paged = no;
+ page_size = 4;
+ size = 1024;
+ min_write_delay = 3600;
+ max_write_delay = 3600;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read = " 1 0 1 0 0 0 0 0",
+ " 0 0 0 x x x x a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ write = " 1 1 0 0 0 0 0 0",
+ " 0 0 0 x x x x a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_lo = " 1 1 0 0 0 0 0 1",
+ " 0 0 0 0 0 0 0 0",
+ " 0 0 0 0 0 0 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 1 1 0 0 0 0 1 0",
+ " 0 0 x x x x x a8",
+ " a7 a6 a5 a4 a3 a2 0 0",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 5;
+ blocksize = 4;
+ readsize = 256;
+ ;
+
+ memory "flash"
+ paged = yes;
+ size = 32768;
+ page_size = 128;
+ num_pages = 256;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ readback_p1 = 0xff;
+ readback_p2 = 0xff;
+ read_lo = " 0 0 1 0 0 0 0 0",
+ " 0 0 0 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ read_hi = " 0 0 1 0 1 0 0 0",
+ " 0 0 0 a12 a11 a10 a9 a8",
+ " a7 a6 a5 a4 a3 a2 a1 a0",
+ " o o o o o o o o";
+
+ loadpage_lo = " 0 1 0 0 0 0 0 0",
+ " 0 0 0 x x x x x",
+ " x x a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ loadpage_hi = " 0 1 0 0 1 0 0 0",
+ " 0 0 0 x x x x x",
+ " x x a5 a4 a3 a2 a1 a0",
+ " i i i i i i i i";
+
+ writepage = " 0 1 0 0 1 1 0 0",
+ " 0 0 0 a12 a11 a10 a9 a8",
+ " a7 a6 x x x x x x",
+ " x x x x x x x x";
+
+ mode = 0x41;
+ delay = 6;
+ blocksize = 128;
+ readsize = 256;
+
+ ;
+
+ memory "lfuse"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0",
+ "x x x x x x x x i i i i i i i i";
+ ;
+
+ memory "hfuse"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0",
+ "x x x x x x x x i i i i i i i i";
+ ;
+
+ memory "efuse"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0",
+ "x x x x x x x x o o o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0",
+ "x x x x x x x x x x i i i i i i";
+ ;
+
+ memory "lock"
+ size = 1;
+ min_write_delay = 4500;
+ max_write_delay = 4500;
+ read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0",
+ "x x x x x x x x x x o o o o o o";
+
+ write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x",
+ "x x x x x x x x 1 1 i i i i i i";
+ ;
+
+ memory "calibration"
+ size = 1;
+ read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x",
+ "0 0 0 0 0 0 0 0 o o o o o o o o";
+ ;
+
+ memory "signature"
+ size = 3;
+ read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x",
+ "x x x x x x a1 a0 o o o o o o o o";
+ ;
+;
_______________________________________________
avrdude-dev mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
