Hi,
Just wondering if this is still an issue in Axis2 1.2 or I did not put
the parameters properly.
Thanks,
-Bo
On 5/17/07, Bo Xie < [EMAIL PROTECTED]> wrote:
>
> Thanks, Amila. I tried your advice using no -pn and -sn. It still only
> generated last one binding out of the 4. I used asix2 1.2 release.
>
> Here is the command line. Anything I did not do right? Attached is the
> output files and wsdl files. Sorry for the 500k size.
>
> C:\programs\work>wsdl2java -o output -p com.xyz.nbi -t -ss -sd -g -S src
> -R src -uri wsrp_service.wsdl
> Using AXIS2_HOME: C:\programs\axis2-1.2
> Using JAVA_HOME: C:\programs\jdk1.5.0_09
> Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> 'file:/C:/programs/work/'.
> Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> Retrieving schema at 'wsrp_v1_types.xsd', relative to
> 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> Retrieving schema at 'http://www.w3.org/2001/xml.xsd', relative to
> 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> 'file:/C:/programs/work/'.
> Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> Retrieving schema at 'wsrp_v1_types.xsd', relative to
> 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> Retrieving schema at 'http://www.w3.org/2001/xml.xsd', relative to
> 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\InvalidHandleException.java file cannot
> be overwritten.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\AccessDeniedException.java file cannot
> be overwritten.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\InvalidRegistrationException.java file
> cannot be overwritten.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\MissingParametersException.java file
> cannot be overwritten.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\InvalidUserCategoryException.java file
> cannot be overwritten.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\OperationFailedException.java file
> cannot be overwritten.
> May 17, 2007 11:55:31 AM
> org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> INFO: The output\src\com\xyz\nbi\InconsistentParametersException.java
> file cannot be overwritten.
>
> Thanks,
> -Bo
> On 5/17/07, Amila Suriarachchi <[EMAIL PROTECTED]> wrote:
> >
> >
> >
> > On 5/17/07, Bo Xie <[EMAIL PROTECTED] > wrote:
> > >
> > > Hi
> > >
> > > I tried on Axis2 1.2 release package. I see there is an -pn
> > > operation. Here is the command line I used. The skeleton file still only
> > > have the operations in the last port(see attached skeleton file).
> > >
> > > My questions are:
> > > 1. Is "-pn WSRPRegistrationService" used correctly, why the
> > > skeleton file does not have the operations from this portType.
> >
> >
> > pn is for port name not for port type.
> >
> > 2. Is there any options to have wsdl2java generate all the portTypes
> > > in the WSDL.
> > >
> > > C:\programs\work>wsdl2java -o output -p com.cisco.csm.nbi -t -ss -sd
> > > -g -S src -R src -pn WSRPRegistrationService -uri wsrp_service.wsdl
> >
> >
> > if you do not use the -pn and -sn parameters it will generate the code
> > for all bindings.
> >
> > Using AXIS2_HOME: C:\programs\axis2- 1.2
> > > Using JAVA_HOME: C:\programs\jdk1.5.0_09
> > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > > 'file:/C:/programs/work/'.
> > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> > > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd ', relative to
> > > 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > > 'file:/C:/programs/work/'.
> > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative to
> > > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd ', relative to
> > > 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The output\src\com\cisco\csm\nbi\InvalidHandleException.java
> > > file cannot be overwritten.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The output\src\com\cisco\csm\nbi\AccessDeniedException.java
> > > file cannot be overwritten.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The
> > > output\src\com\cisco\csm\nbi\InvalidRegistrationException.java file cannot
> > > be overwritten.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The
> > > output\src\com\cisco\csm\nbi\MissingParametersException.java file cannot
be
> > > overwritten.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The
> > > output\src\com\cisco\csm\nbi\InvalidUserCategoryException.java file cannot
> > > be overwritten.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The output\src\com\cisco\csm\nbi\OperationFailedException.java
> > > file cannot be overwritten.
> > > May 16, 2007 6:05:12 PM
> > > org.apache.axis2.wsdl.codegen.writer.ClassWriter createOutFile
> > > INFO: The
> > > output\src\com\cisco\csm\nbi\InconsistentParametersException.java file
> > > cannot be overwritten.
> > >
> > > Thanks,
> > > -Bo
> > >
> > > On 3/14/07, Amila Suriarachchi <[EMAIL PROTECTED]> wrote:
> > > >
> > > > I recently added multi services support to axis2. can you have a
> > > > look with a nighly build?
> > > >
> > > > On 3/7/07, Amila Suriarachchi < [EMAIL PROTECTED]>
> > > > wrote:
> > > > >
> > > > >
> > > > >
> > > > > On 3/7/07, Jess Fisher <[EMAIL PROTECTED]> wrote:
> > > > > >
> > > > > > I'm trying to understand what's happening here, so bear with
> > > > > > me...
> > > > > > Using Axis 1.4, I run the WSDL2Java like this:
> > > > > > java org.apache.axis.wsdl.WSDL2Java -s -o
> > > > > > C:\temp\generated_source C:\temp\wsrp_service.wsdl
> > > > > >
> > > > > > This created all the java interfaces for the defined
> > > > > > wsdl:portType. See attached java_interfaces.zip
> > > > > >
> > > > > > This also automatically generated all the binding classes for
> > > > > > the <wsdl:binding> defined in wsrp_v1_bindings.wsdl (see my
previous post
> > > > > > where I attached this file there)
> > > > > > These were all defined in wsrp_v1_bindings.wsdl:
> > > > > > <wsdl:binding name="WSRP_v1_Markup_Binding_SOAP"
> > > > > > type="intf:WSRP_v1_Markup_PortType">
> > > > > > <wsdl:binding name="WSRP_v1_ServiceDescription_Binding_SOAP"
> > > > > > type="intf:WSRP_v1_ServiceDescription_PortType">
> > > > > > <wsdl:binding name="WSRP_v1_Registration_Binding_SOAP"
> > > > > > type="intf:WSRP_v1_Registration_PortType">
> > > > > > <wsdl:binding name="WSRP_v1_PortletManagement_Binding_SOAP"
> > > > > > type="intf:WSRP_v1_PortletManagement_PortType">
> > > > > >
> > > > > > The way I run Axis2's wsdl2java is as follows:
> > > > > > wsdl2java.bat -uri C:\temp\wsrp_service.wsdl -o
> > > > > > C:\temp\generated_source -ss -d adb -g -ns2p
> > > > > >
urn:oasis:names:tc:wsrp:v1:types=oasis.names.tc.wsrp.v1.types,urn:oasis:names:tc:wsrp:v1:intf=
> > > > > > oasis.names.tc.wsrp.v1.intf,urn:oasis:names:tc:wsrp:v1:bind
> > > > > > =oasis.names.tc.wsrp.v1.bind,urn:oasis:names:tc:wsrp:v1:wsdl=
> > > > > > oasis.names.tc.wsrp.v1.wsdl -ssi
> > > > > > However when I used Axis2's wsdl2java I did not get the java
> > > > > > interfaces for <wsdl:portType>. Why does the axis 1.x generate
> > > > > > the java interfaces but axis 2 doesn't?
> > > > > >
> > > > >
> > > > > well Axis2 generates the interface if you have specified the
> > > > > -ssi parameter. But the difference is it has the service name instead
of the
> > > > > porttype name. I am not familiar with the axis 1.x but actually
> > > > > this interface method signatures are depends on the binding.
> > > > >
> > > > > Also, I had to run wsdl2java seperately on wsrp_v1_bindings.wsdl
> > > > > > before it would read my <wsdl:binding> defined there to create my
java
> > > > > > classes for my wsdl bindings. Note that wsrp_service.wsdl already
imports
> > > > > > wsrp_v1_bindings.wsdl. It also does not generate the java classes
for all
> > > > > > my wsdl:binding (I guess due to multiple defined wsdl:binding in my
wsdl
> > > > > > file). I get this message when I run the wsdl2java on
wsrp_v1_bindings.wsdl:
> > > > > >
> > > > > > org.apache.axis2.description.WSDL11ToAxisServiceBuilderfindBinding
> > > > > > INFO: A service element was not found - picking a random
> > > > > > binding!
> > > > > >
> > > > >
> > > > > In Axis2 it generates the code for only one binding in one
> > > > > service. So if there is no service it creates a random
> > > > > service.Actually this is an axis2 limitation.
> > > > >
> > > > > What I did to workaround this is to manually run wsdl2java on
> > > > > > each of my wsdl:binding, so I can get the java classes for all of my
> > > > > > bindings. Axis 1.x wsdl2java automatically generated java
> > > > > > classes for all my wsdl:binding defined in wsrp_v1_bindings.wsdl.
> > > > > >
> > > > > > Any thoughts?
> > > > > >
> > > > > > Thanks again!
> > > > > >
> > > > > > *Amila Suriarachchi <[EMAIL PROTECTED]>* wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 3/7/07, Jess Fisher <[EMAIL PROTECTED] > wrote:
> > > > > > >
> > > > > > > From the attached wsdl file:wsrp_v1_interfaces.wsdl, the
> > > > > > > following are defined:
> > > > > > > <wsdl:portType name="WSRP_v1_Markup_PortType">
> > > > > > > <wsdl:portType name="WSRP_v1_ServiceDescription_PortType">
> > > > > > > <wsdl:portType name="WSRP_v1_Registration_PortType">
> > > > > > > <wsdl:portType name="WSRP_v1_PortletManagement_PortType">
> > > > > > >
> > > > > > > But, when running Axis2's WSDL2Java, the corresponding java
> > > > > > > classes (for the wsdl:portType) are not created.
> > > > > > > Using Axis 1.4's WSDL2Java, the corresposing java classes
> > > > > > > were generated.
> > > > > > >
> > > > > >
> > > > > > using axis2 you can not generate the code for portTypes. The
> > > > > > reason for this is the skelton and and stub interfaces depends on
the
> > > > > > binding. Why you need to generate the code for a port type?
> > > > > >
> > > > > > I run the WSDL2Java against wsrp_service.wsdl first which
> > > > > > > imports wsrp_v1_bindings.wsdl which then imports
wsrp_v1_interfaces.wsdl.
> > > > > > >
> > > > > > > Is this a bug?
> > > > > > >
> > > > > >
> > > > > > no I believe.
> > > > > >
> > > > > > If yes, does anybody know of the bug ID ? I cannot find it in
> > > > > > > JIRA.
> > > > > > > Or is there a WSDL2Java option I need to set to generate
> > > > > > > java classes for the portType, specifically?
> > > > > > >
> > > > > >
> > > > > > if you do not have specified any parts or namespace ( in rpc)
> > > > > > in soap:body (in your binding) and generate the code with
parameters -ss
> > > > > > -sd -ssi and with any binding (-d adb, -d jibx, -d xmlbeans, -d
jaxbri) I
> > > > > > think you can get what you need. It simply generates the skelton,
skelton
> > > > > > interface and the service.xml.
> > > > > >
> > > > > > (I've used -ss, -g, -d adb, -ssi)
> > > > > > >
> > > > > > > Thanks.
> > > > > > >
> > > > > > > ------------------------------
> > > > > > > Need Mail bonding?
> > > > > > > Go to the Yahoo! Mail
Q&A<http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx?link=ask&sid=396546091>for
great
> > > > > > > tips from Yahoo!
Answers<http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx?link=ask&sid=396546091>users.
--0-1424838073-1173226094=:65510--
> > > > > > >
> > > > > > >
> > > > > > >
---------------------------------------------------------------------
> > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Amila Suriarachchi,
> > > > > > WSO2 Inc.
> > > > > >
> > > > > >
> > > > > > ------------------------------
> > > > > > It's here! Your new message!
> > > > > > Get new email
alerts<http://us.rd.yahoo.com/evt=49938/*http://tools.search.yahoo.com/toolbar/features/mail/>with
the free Yahoo!
> > > > > > Toolbar. --0-1402565997-1173253433=:40062--
> > > > > >
> > > > > >
> > > > > >
> > > > > >
---------------------------------------------------------------------
> > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Amila Suriarachchi,
> > > > > WSO2 Inc.
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Amila Suriarachchi,
> > > > WSO2 Inc.
> > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> > >
> >
> >
> > --
> > Amila Suriarachchi,
> > WSO2 Inc.
>
>
>
>
