Juha Ylönen wrote: > -------- Original-Nachricht -------- > > > Datum: Wed, 20 Jan 2010 10:15:59 +0800 > > Von: Marek Lindner <lindner_ma...@yahoo.de> > > > > Complete configuration means: brctl show, ifconfig, cat /proc/net/batman- > > adv/interfaces (or batctl if) and ping output. > > Could be the first one in the list as brctl fails. CONFIG_BRIDGE is not > configured in the device kernel. Is batman-adv dependent on this? I'll > recompile the kernel and see what happens (it's a slow process), in the > meanwhile, what other kernel configurations are needed for batman-adv?
No, bridge stuff is not really a dependency. Only many configurations use is to bridge the bat0 and for example the ethernet interface together. The dependencies of 0.2 are currently PROC_FS and PACKET. Just as side note for the futyre: Configure the mtu of bat0 to match the mtu of your other devices in the bridge or otherwise big packets will be dropped while bridging. @Andrew: We don't depend on PACKET after the merge of the skb based transfers. Please remove it from Kconfig - we need NET instead. Best regards, Sven
signature.asc
Description: This is a digitally signed message part.