2012/8/17 Jack <x6719...@gmail.com>: > Dear developers, > > Hello. I have a Broadcom 43227, with ID 14e4:4358. According to > previous threads, I patched and recompiled the module 'bcma' by adding > PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) to host_pci.c. However, it > does not work as well. > > I am using 3.4.9-1-ARCH kernel, and I got the following dmesg after > inserting the module b43. No new interfaces showed up. > > [ 386.153119] bcma: Found chip with id 0xA8DB, rev 0x00 and package 0x08 > [ 386.153164] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, > rev 0x25, class 0x0) > [ 386.153201] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, > rev 0x1E, class 0x0) > [ 386.153278] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev > 0x12, class 0x0) > > [ 386.153313] bcma: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, > rev 0x07, class 0x0) > [ 386.153484] bcma: PLL init unknown for device 0xA8DB > [ 386.192637] bcma: PMU resource config unknown for device 0xA8DB > [ 386.204612] bcma: PMU switch/regulators init unknown for device 0xA8DB > [ 386.216631] bcma: Workarounds unknown for device 0xA8DB > [ 386.253679] bcma: Using fallback SPROM failed (err -2) > [ 386.253686] bcma: No SPROM available > [ 386.293112] bcma: Bus registered > [ 428.245922] Broadcom 43xx driver loaded [ Features: PMNLS ] > > I have no ideas about what is going wrong, whether the SPROM or the > b43 driver. I would like to test new patches and give feedback as far > as possible.
You won't get BCM43227 support in b43 yet, it's not finished yet. But you should try to fix that SPROM error. Please test patch I've just submitted (and Cc-ed you): [RFT][PATCH] bcma: BCM43227 support -- Rafał _______________________________________________ b43-dev mailing list b43-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/b43-dev
