2012/8/18 Jack <x6719...@gmail.com>: > 2012/8/18 Rafał Miłecki <zaj...@gmail.com>: >> 2012/8/17 Jack <x6719...@gmail.com>: >>> Dear developers, >>> >>> Hello. I have a Broadcom 43227, with ID 14e4:4358. According to >>> previous threads, I patched and recompiled the module 'bcma' by adding >>> PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) to host_pci.c. However, it >>> does not work as well. >>> >>> I am using 3.4.9-1-ARCH kernel, and I got the following dmesg after >>> inserting the module b43. No new interfaces showed up. >>> >>> [ 386.153119] bcma: Found chip with id 0xA8DB, rev 0x00 and package 0x08 >>> [ 386.153164] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, >>> rev 0x25, class 0x0) >>> [ 386.153201] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, >>> rev 0x1E, class 0x0) >>> [ 386.153278] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev >>> 0x12, class 0x0) >>> >>> [ 386.153313] bcma: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, >>> rev 0x07, class 0x0) >>> [ 386.153484] bcma: PLL init unknown for device 0xA8DB >>> [ 386.192637] bcma: PMU resource config unknown for device 0xA8DB >>> [ 386.204612] bcma: PMU switch/regulators init unknown for device 0xA8DB >>> [ 386.216631] bcma: Workarounds unknown for device 0xA8DB >>> [ 386.253679] bcma: Using fallback SPROM failed (err -2) >>> [ 386.253686] bcma: No SPROM available >>> [ 386.293112] bcma: Bus registered >>> [ 428.245922] Broadcom 43xx driver loaded [ Features: PMNLS ] >>> >>> I have no ideas about what is going wrong, whether the SPROM or the >>> b43 driver. I would like to test new patches and give feedback as far >>> as possible. >> >> You won't get BCM43227 support in b43 yet, it's not finished yet. But >> you should try to fix that SPROM error. Please test patch I've just >> submitted (and Cc-ed you): >> [RFT][PATCH] bcma: BCM43227 support >> > There're no more complains about the SPROM after applying your patch. > BCMA is supposed to work properly. > I'm looking forward to the support of 43227 in b43. I would like to > test a development version if possible.
OK, thanks. If you wish you can edit net/wireless/b43/main.c and find: BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS), Then add BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1E, BCMA_ANY_CLASS), below the line you found. This will make b43 try support your card but it will fail after detecting unsupported PHY/RADIO. -- Rafał _______________________________________________ b43-dev mailing list b43-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/b43-dev
