On N-PHY it's also done after TX power fix, so it was easy to spot.
Unfortunately the MMIO logs I have from ndsiwrapper include channels
1-12 only, so enabling code for 13 and 14 is just a N-PHY-based guess.
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
drivers/net/wireless/b43/phy_ht.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/net/wireless/b43/phy_ht.c
b/drivers/net/wireless/b43/phy_ht.c
index f7463aa..4ccd371 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -285,6 +285,24 @@ static void b43_phy_ht_tx_power_fix(struct b43_wldev *dev)
* Channel switching ops.
**************************************************/
+static void b43_phy_ht_spur_avoid(struct b43_wldev *dev,
+ struct ieee80211_channel *new_channel)
+{
+ struct bcma_device *core = dev->dev->bdev;
+ int spuravoid = 0;
+
+ /* Check for 13 and 14 is just a guess, we don't have enough logs. */
+ if (new_channel->hw_value == 13 || new_channel->hw_value == 14)
+ spuravoid = 1;
+ bcma_core_pll_ctl(core, B43_BCMA_CLKCTLST_PHY_PLL_REQ, 0, false);
+ bcma_pmu_spuravoid_pllupdate(&core->bus->drv_cc, spuravoid);
+ bcma_core_pll_ctl(core,
+ B43_BCMA_CLKCTLST_80211_PLL_REQ |
+ B43_BCMA_CLKCTLST_PHY_PLL_REQ,
+ B43_BCMA_CLKCTLST_80211_PLL_ST |
+ B43_BCMA_CLKCTLST_PHY_PLL_ST, false);
+}
+
static void b43_phy_ht_channel_setup(struct b43_wldev *dev,
const struct b43_phy_ht_channeltab_e_phy *e,
struct ieee80211_channel *new_channel)
@@ -318,6 +336,8 @@ static void b43_phy_ht_channel_setup(struct b43_wldev *dev,
if (1) /* TODO: On N it's for early devices only, what about HT? */
b43_phy_ht_tx_power_fix(dev);
+ b43_phy_ht_spur_avoid(dev, new_channel);
+
b43_phy_write(dev, 0x017e, 0x3830);
}
--
1.7.10.4
_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
