It was just another similar-to-N-PHY and easy-to-track routine:
write32 0xb0601408 <- 0x00002057
phy_read(0x0001) -> 0x0000
phy_write(0x0001) <- 0x4000
phy_write(0x0001) <- 0x0000
write32 0xb0601408 <- 0x00002055
(b43_phy_ht_force_rf_sequence was moved up unmodified)
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
P.S.
There is a "msleep" usage warning, but it's in the code I just move. Will fix
sleeps/waits later globally.
---
drivers/net/wireless/b43/phy_ht.c | 68 +++++++++++++++++++++++++------------
1 file changed, 47 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_ht.c
b/drivers/net/wireless/b43/phy_ht.c
index 4b24816..aedbae7 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -154,6 +154,31 @@ static void b43_radio_2059_init(struct b43_wldev *dev)
}
/**************************************************
+ * RF
+ **************************************************/
+
+static void b43_phy_ht_force_rf_sequence(struct b43_wldev *dev, u16 rf_seq)
+{
+ u8 i;
+
+ u16 save_seq_mode = b43_phy_read(dev, B43_PHY_HT_RF_SEQ_MODE);
+ b43_phy_set(dev, B43_PHY_HT_RF_SEQ_MODE, 0x3);
+
+ b43_phy_set(dev, B43_PHY_HT_RF_SEQ_TRIG, rf_seq);
+ for (i = 0; i < 200; i++) {
+ if (!(b43_phy_read(dev, B43_PHY_HT_RF_SEQ_STATUS) & rf_seq)) {
+ i = 0;
+ break;
+ }
+ msleep(1);
+ }
+ if (i)
+ b43err(dev->wl, "Forcing RF sequence timeout\n");
+
+ b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode);
+}
+
+/**************************************************
* Various PHY ops
**************************************************/
@@ -173,6 +198,20 @@ static u16 b43_phy_ht_classifier(struct b43_wldev *dev,
u16 mask, u16 val)
return tmp;
}
+static void b43_phy_ht_reset_cca(struct b43_wldev *dev)
+{
+ u16 bbcfg;
+
+ b43_phy_force_clock(dev, true);
+ bbcfg = b43_phy_read(dev, B43_PHY_HT_BBCFG);
+ b43_phy_write(dev, B43_PHY_HT_BBCFG, bbcfg | B43_PHY_HT_BBCFG_RSTCCA);
+ udelay(1);
+ b43_phy_write(dev, B43_PHY_HT_BBCFG, bbcfg & ~B43_PHY_HT_BBCFG_RSTCCA);
+ b43_phy_force_clock(dev, false);
+
+ b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RST2RX);
+}
+
static void b43_phy_ht_zero_extg(struct b43_wldev *dev)
{
u8 i, j;
@@ -209,27 +248,6 @@ static void b43_phy_ht_afe_unk1(struct b43_wldev *dev)
}
}
-static void b43_phy_ht_force_rf_sequence(struct b43_wldev *dev, u16 rf_seq)
-{
- u8 i;
-
- u16 save_seq_mode = b43_phy_read(dev, B43_PHY_HT_RF_SEQ_MODE);
- b43_phy_set(dev, B43_PHY_HT_RF_SEQ_MODE, 0x3);
-
- b43_phy_set(dev, B43_PHY_HT_RF_SEQ_TRIG, rf_seq);
- for (i = 0; i < 200; i++) {
- if (!(b43_phy_read(dev, B43_PHY_HT_RF_SEQ_STATUS) & rf_seq)) {
- i = 0;
- break;
- }
- msleep(1);
- }
- if (i)
- b43err(dev->wl, "Forcing RF sequence timeout\n");
-
- b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode);
-}
-
static void b43_phy_ht_read_clip_detection(struct b43_wldev *dev, u16 *clip_st)
{
clip_st[0] = b43_phy_read(dev, B43_PHY_HT_C1_CLIP1THRES);
@@ -319,6 +337,14 @@ static void b43_phy_ht_spur_avoid(struct b43_wldev *dev,
b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
/* TODO: reset PLL */
+
+ if (spuravoid)
+ b43_phy_set(dev, B43_PHY_HT_BBCFG, B43_PHY_HT_BBCFG_RSTRX);
+ else
+ b43_phy_mask(dev, B43_PHY_HT_BBCFG,
+ ~B43_PHY_HT_BBCFG_RSTRX & 0xFFFF);
+
+ b43_phy_ht_reset_cca(dev);
}
static void b43_phy_ht_channel_setup(struct b43_wldev *dev,
--
1.7.10.4
_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
