Hello, Sorry if I'm missing something obvious but does bable support ECMP ?
I tried a simple configuration with two routers annoucing the same network (4000::/64) with the same metric to a thrid routeur but babel install only one route in the routing table. The other is classified as « feasible ». A simple debug from the third router : My id 02:16:3e:ff:fe:fc:ef:1b seqno 23526 Neighbour fe80::216:3eff:fe2b:ea98 dev eth0 reach 0000 ureach 0000 rxcost 65535 txcost 96 rtt 0.000 rttcost 0 chan -2. Neighbour fe80::216:3eff:fed9:1a61 dev eth0 reach 8000 ureach 0000 rxcost 65535 txcost 96 rtt 0.000 rttcost 0 chan -2. 192.168.42.52/32 from 0.0.0.0/0 metric 0 (exported) 4000::/64 from ::/0 metric 65535 (65535) refmetric 100 id 02:16:3e:ff:fe:d9:1a:61 seqno 26988 age 1 via eth0 neigh fe80::216:3eff:fed9:1a61 (installed) 4000::/64 from ::/0 metric 65535 (65535) refmetric 100 id 02:16:3e:ff:fe:2b:ea:98 seqno 23450 age 1 via eth0 neigh fe80::216:3eff:fe2b:ea98 (feasible) Is there a configuration element I'm missing ? Thanks ! Cet e-mail, y compris toute pièce qui y est jointe, peut contenir des informations confidentielles. Cet e-mail est censé s adresser exclusivement au(x) destinataire(s). Si vous l avez reçu par erreur, veuillez en informer l expéditeur immédiatement par réponse à cet e-mail et veuillez le détruire, ainsi que toutes les pièces qui y sont jointes, sans l ouvrir ni en faire de copie
_______________________________________________ Babel-users mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/babel-users
