Ok, I did resolve why the incremental was taking an almost full backup.
I just needed to remove the '+' after $incrDate in the config.pl file. So now I'm just back to the MB/s issue. ___________________________________________ David Williams On Wed, February 22, 2006 09:04, David Williams wrote: > All, > > > Just looking to see if my backup speeds are in the right range or if they are > a little slow. > > > My setup is as follows: > > > 1 Linux box running Mandriva 2006. This is my backuppc server and I am > backing up several partitions on this box. > Total backup size is around 65GB for a full backup. The incrementals are > about the same size too, which surprises me. > > > 1 Windows box running Win XP. The Linux box is running samba and backsup the > windows box via samba. A full backup > is around 40GB with the incremental being around 3 GB. > > The following is what is being reported as the MB/sec > > > Windows: around 5 MB/s > Linux: Between 9.5 to 10.8 MB/s > > > Both these boxes are on the same LAN and are both directly connected to my > router. The Ethernet cards are 10/100. I > would have hoped for a faster throughput but perhaps there is a good reason > for this? At least on the Linux box > (since there should be no network overhead) I'm very surprised by the speed. > The linux box is being backed up using > tar. > > So, are these speeds normal are do I have the ability to get better > throughput? > > > Also, why would the incremental backups on my Linux box be roughly the same > size as the full backup? Alot of the > files are music and videos and really don't change. It's taking around 90 > minutes for a full or incremental backup. > > The only other information I can add is as follows: The drives on the Linux > machine are SATA drives and on the > windows box I have one SATA drive and one IDE drive. > > Just noticed something in the Xfer log for the Linux box which may explain > why it's doing such a large backup for the > incremental backups: > > Running: /usr/bin/sudo /bin/gtar -c -v -f - -C /var --totals > --newer=2006-02-14\ 11:14:20 . > Xfer PIDs are now 28504,28503 > /bin/gtar: Substituting 1901-12-13 15:45:52 for unknown date format > `2006-02-14\\ 11:14:20' > > > Looks like there is a problem with the date format and it substituting in a > date from over 100 years ago. > > > Appreciate any help. > > > Thanks. > > > ___________________________________________ > David Williams > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the > web. DOWNLOAD SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 > _______________________________________________ > BackupPC-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/backuppc-users > http://backuppc.sourceforge.net/ > > > ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ BackupPC-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/backuppc-users http://backuppc.sourceforge.net/
