Kurt Tunkko wrote:
> Hello Holker,
>
> Holger Parplies wrote:
>
>
>>> 3. Mirror partition tables from one of the existing disks:
>>>
>>> # sudo sfdisk -d /dev/sda | sfdisk /dev/sdc
>>>
>> apart from something having been mangled ("???"), I tend to wonder why you
>> need root permission to read the partition table of /dev/sda but not to write
>> it to /dev/sdc ;-). You might, of course, have relaxed the permissions on
>> /dev/sdc, but I'd spare an extra 'sudo' for the howto ;-).
>>
>
> I took the information above from the page:
>
> Setting up software RAID in Ubuntu Server
> http://advosys.ca/viewpoints/2007/04/setting-up-software-raid-in-ubuntu-server/
>
> " Once system as been rebooted with the new unformatted replacement
> drive in place, some manual intervention is required to partition the
> drive and add it to the RAID array.
> The new drive must have an identical (or nearly identical) partition
> table to the other. You can use fdisk to manually create a partition
> table on the new drive identical to the table of the other, or if both
> drives are identical you can use the “sfdisk” command to duplicate the
> partition. For example, to copy the partition table from the second
> drive “sdb” onto the first drive “sda”, the sfdisk command is as follows:
>
> sfdisk –d /dev/sdb | sfdisk /dev/sda"
>
> I don't know if it's possible to add a 3rd drive to the RAID, that
> hasn't got the right partitions on it :-?
>
>
>> I believe the original idea is *not* to temporarily cripple your RAID but
>> rather to add a third disk (three way mirror).
>>
>
> you're right I changed my setup and have now a three way raid, so that I
> can unplugg one drive and keep it as offline backup.
>
> > I'm not sure if you can do that after initial creation of the array,
> > but the man page suggests it should be possible "on kernels which
> > provide necessary support".
>
> On Ubuntu Server I was able to add a third harddisk to the array and get
> it synced. After sync had been completed I can remove the 3rd drive from
> the array and lock it away for offline storage.
>
> Change a 2-disk RAID1 to a 3-disk RAID:
> # sudo mdadm --grow --raid-devices=3 /dev/md0
>
> Add a 3rd drive to the existing 2disk RAID1:
> # sudo mdadm --add /dev/md0 /dev/sdc1
> -> spare will be rebuilded
>
> Remove 3rd disk from RAID
> # sudo mdadm --fail /dev/md0 /dev/sdb1
> # sudo mdadm --remove /dev/md0 /dev/sdb1
>
> While this approach is much better than the one I suggested yesterday it
> still leads to some Questions:
>
> 1) Is there a way to add the 3rd drive to RAID1 as soon as it will be
> connected to the system (External harddrive that is oonnected via usb2)?
> Or more generally: Can I run a script when an external storage device is
> connected via usb?
>
Yes. http://ubuntuforums.org/showthread.php?t=502864
> 2) Do I need to resize my RAID after removing the 3rd harddrive with
> # sudo mdadm --grow --raid-devices=2 /dev/md0
>
Personally, I wouldn't bother, unless it made my monitoring software
throw a false error.
> Are there any problems when the RAID will be used in clean, but
> degraded state?
>
I doubt it. The mirror is going to be active with two drives, so writes
might even be faster.
> - Kurt
>
Chris
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
BackupPC-users mailing list
BackupPC-users@lists.sourceforge.net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
