Tim Chipman a écrit : > check your config file for the specific server in question > > I found this same behaviour, it is if you have a null path at end of > stanza of paths to backup > > so what it is literally telling you, is that it finished the first > (real, desired) work > but failed on the (unwanted, null) work > > hence the confusion > > In my case, I think the null field was appended via the web interface, > by accident, when I was doing initial config / setup of paths to be > backed up. At first I thought it was an rsync issue, but I had > identical behaviour with "tar" as well. Lots of fun! :-) > > Took a few weeks before the answer jumped out at me.. > > -Tim
Tim, it's OK now ! You are right ;-) I had checked and suppress some folders and keep only "/etc" BEFORE write on the ML... but NEVER I think to remove this stupid empty line at the bottom of the folders list on the Xfer page ! ... Now I click on "delete" and suppress the line, and all is normal. BackupPC finish correctly. No error message ;-) Thank a lot for your very fast (and intersting) reply ;-) I make a note on my blog (en français) about this problem and the solution, because I search a long time and it can be useful for other ;-) http://didier.misson.net/blog/2009/01/26/backuppc-backup-aborted > On Sun, Jan 25, 2009 at 6:31 PM, Didier Misson <[email protected]> wrote: >> Hello, >> >> I'm new on this mailing list. >> >> I use BackupPc since several months on an Ubuntu 8.04 server. >> No problem with it. >> I backup 2 Debian Etch servers : fine ;-) >> >> But these backups are very slow because my backup server is at home on >> an ADSL line 6Mbps ... >> If a crash occurs (I hope no), I will need to restore at the upload >> speed of 640 Kbps... :-( very long ! >> >> >> So, we decide to install BackupPc on our secondary server (hosted by OVH). >> >> ================================================ >> >> I try to backup our main server, on the BackupPc running on the >> secondary server. >> >> Both servers are : >> >> Debian GNU/Linux 4.0 >> >> Linux ks12345.kimsufi.com 2.6.27.10-grsec-xxxx-grs-ipv6-64 >> >> >> >> Due to problem when I try to install BackupPc on the secondary server >> (and BackupPC too old in Debian), I add "Backup Port" on the apt source >> list on this secondary server. >> >> Here is the version : >> >> ~$ aptitude show backuppc >> Package: backuppc >> State: installed >> Automatically installed: no >> Version: 3.1.0-4~bpo40+1 <----- >> Priority: optional >> Section: utils >> .. >> >> >> >> >> >> I ALWAYS have the same problem : >> >> - backup seem to run correctly : all files are seen in the log and are >> backup >> - at the end of the backup, a message "Done: 1837 files, 43529611 bytes >> Backup aborted ()" >> >> and... the backup aborted just at the END ! >> >> So : >> - it always keep the partial first backup it try to make >> - as no successfull backup, each time BackupPc try to make a FULL backup >> again... very long ! >> >> >> -------------------------------------------------------- >> >> Here is the log : >> >> Contents of file /backup/pc/ks12345.kimsufi.com/XferLOG.bad.z, modified >> 2009-01-25 22:44:01 >> >> full backup started for directory /etc >> Running: /usr/bin/ssh -q -x -l root ks28853.kimsufi.com /usr/bin/rsync >> --server --sender --numeric-ids --perms --owner --group -D --links >> --hard-links --times --block-size=2048 --recursive --ignore-times . /etc/ >> Xfer PIDs are now 15588 >> Got remote protocol 29 >> Negotiated protocol version 28 >> Xfer PIDs are now 15588,15589 >> create d 755 0/0 4096 . >> create 600 0/0 0 .pwd.lock >> same 644 0/0 588 GeoIP.conf.default >> same 644 0/0 611 Net >> create d 755 0/0 4096 X11 >> create d 755 0/0 4096 X11/Xresources >> same 644 0/0 319 X11/Xresources/x11-common >> same 755 0/0 3944 X11/Xsession >> create d 755 0/0 4096 X11/Xsession.d >> same 644 0/0 1869 >> X11/Xsession.d/20x11-common_process-args >> ... >> >> ... >> create d 755 0/0 4096 vim >> same 644 0/0 2318 vim/vimrc >> same 644 0/0 774 vim/vimrc.tiny >> create d 755 0/0 4096 w3m >> same 644 0/0 1185 w3m/config >> same 644 0/0 44 w3m/mailcap >> same 644 0/0 4221 wgetrc >> create d 755 0/0 4096 xml >> same 644 0/0 475 xml/catalog >> same 644 0/0 360 xml/catalog.old >> same 644 0/0 517 xml/xml-core.xml >> same 644 0/0 381 xml/xml-core.xml.old >> Done: 1837 files, 43529611 bytes >> >> Backup aborted () <======= no error code !!! >> >> Not saving this as a partial backup since it has fewer files than the >> prior one (got 1837 and 1837 files versus 140628) >> >> >> >> The problem is that this message "Backup aborted" has NO error code ! >> So how can I search on the net to see what error and what solution ? -- Didier http://didier.misson.net/blog ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ BackupPC-users mailing list [email protected] List: https://lists.sourceforge.net/lists/listinfo/backuppc-users Wiki: http://backuppc.wiki.sourceforge.net Project: http://backuppc.sourceforge.net/
