Hi guys.
I use bacula 5.2.13 with IBM TS3200 library.
Periodically I face problem with load slot time out. In logs it looks lilke:
/22-Sep 00:35 baculasrv-dir JobId 10471: Recycled volume "220AAAL6"//
//22-Sep 00:35 baculasrv-sd JobId 10471: 3304 Issuing autochanger "load
slot 1, drive 1" command.//
//22-Sep 00:40 baculasrv-sd JobId 10471: Fatal error: 3992 Bad
autochanger "load slot 1, drive 1": ERR=Child died from signal 15:
Termination.//
//Results=Program killed by Bacula (timeout)//
//22-Sep 00:32 sqcompose-fd JobId 10471: Fatal error: backup.c:1019
Network send error to SD.//
/
As I understood, bacula tries to load slot for 5 minutes and if it's not
successful stops job.
I started investigation why bacula sometimes doesn't manage to load slot
in 5 minutes and find out library stops responding to commands and
starts cleaning drive procedure which takes more than 5 minutes(Library
was configured to clean drive automatically)
So how can I solve the problem?
I've found place in mtx-changer script where declared 300 seconds to
wait. I've increased it value to 1800 seconds. Is it only place or I
have to change somthing else in sources?
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-devel mailing list
Bacula-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-devel
