On Saturday 18 November 2006 13:09, Scott Barninger wrote: > Hello Kern, > > The capability to build client-only rpm is available in 1.39.x but not > 1.38.11 as released.
Oh, that is the subtle point I missed. > In either event you would need a devel machine to > build it on unless you build static. Alan Brown was having the same > issue with some older RH7 boxes so I created a client-only-static spec > for him to use, with which I believe he was successful. I am attaching > it hereto. Note the platform define you must set. It produces a > bacula-static-client rpm package which contains the fd only, no bconsole > or anything else. OK, many thanks, I'll assume that Frdinando can take it from there ... Best regards, Kern > > On Sat, 2006-11-18 at 12:32 +0100, Kern Sibbald wrote: > > Hello Scott, > > > > Do you have anything you can add to this? > > > > Best regards, > > > > Kern > > > > On Friday 17 November 2006 12:20, Ferdinando Pasqualetti wrote: > > > Hello Kern, > > > > > > thanks for your answer. I checked the manual again, but I only found how > > > to make a "client -only" version using the tarball sources. I did non find > > > any way for building an rpm "client-only". Rpmbuild defines only allow to > > > set platform, database type and some other. > > > > > > Obviously I can build the complete package and then use the client rpm > > > only, but I need all necessary packages on the system. > > > > > > I still have to backup some RedHat 7.3 systems that had the FD client > > > installed with an RPM for rev 1.36. I had to build binaries from the > > > tarball in order to upgrade to 1.38 (unless setup one of the systems with > > > MySQL and all the other necessary stuff). If it would be possible to have > > > a %define enable-client-only in the rpm source spec (as in tarball) it > > > would be easer. May be this can be easily done modifying the spec file, > > > but not by me. > > > > > > Also a worst situation. A couple of SUSE SLES 9 system do not have > > > development installed, but client RPMS for these systems are not on the > > > web any more. > > > I found a 1.38.9 for SLES 9.1 on rpmfind.org, so the problem is over. > > > > > > What I would like to say is that it would be useful build clients also for > > > old platforms (specially when the old clients are not compatible). > > > > > > Anyway it is a minor issue related to what bacula gives us. > > > > > > Thanks again > > > > > > -------------------------------------------------------------------------- > > > Ferdinando Pasqualetti > > > G.T.Dati srl > > > Tel. 0557310862 - 3356172731 - Fax 055720143 > > > > > > > > > > > > > > > > > > > > > Kern Sibbald <[EMAIL PROTECTED]> > > > Inviato da: [EMAIL PROTECTED] > > > 16/11/2006 17.25 > > > > > > Per > > > bacula-users@lists.sourceforge.net > > > CC > > > Ferdinando Pasqualetti <[EMAIL PROTECTED]> > > > Oggetto > > > Re: [Bacula-users] SUSE SLES 9 bacula client 1.38.11 > > > > > > > > > > > > > > > > > > > > > On Wednesday 15 November 2006 16:41, Ferdinando Pasqualetti wrote: > > > > Hello List, > > > > have anyone built an RPM of bacula-client 1.38.11 for SuSe SLES 9? > > > > I have a couple of systems without development software installed and no > > > > > > > other system with that distro. > > > > Does also anyone knows how to lauch the rpmbuild command in order to > > > make > > > > a "client-only" version? > > > > > > This is documented in the manual. > > > > > > > My attempts to modify the SPEC file never gave a good result. > > > > Thanks to people providing this software in any case. > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > > Ferdinando Pasqualetti > > > > G.T.Dati srl > > > > Tel. 0557310862 - 3356172731 - Fax 055720143 > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > Take Surveys. Earn Cash. Influence the Future of IT > > > > Join SourceForge.net's Techsay panel and you'll get the chance to share > > > your > > > > opinions on IT & business topics through brief surveys - and earn cash > > > > > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > > _______________________________________________ > > > > Bacula-users mailing list > > > > Bacula-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > > > > > > > ------------------------------------------------------------------------- > > > Take Surveys. Earn Cash. Influence the Future of IT > > > Join SourceForge.net's Techsay panel and you'll get the chance to share > > > your > > > opinions on IT & business topics through brief surveys - and earn cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > _______________________________________________ > > > Bacula-users mailing list > > > Bacula-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > Take Surveys. Earn Cash. Influence the Future of IT > > > Join SourceForge.net's Techsay panel and you'll get the chance to share your > > > opinions on IT & business topics through brief surveys - and earn cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > _______________________________________________ > > > Bacula-users mailing list > > > Bacula-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
