> Connecting to Storage daemon Dell at count:9103 ... > Sending label command for Volume "Test" Slot 83 ... > 3301 Issuing autochanger "loaded? drive 0" command. > 3302 Autochanger "loaded? drive 0", result: nothing loaded. > 3304 Issuing autochanger "load slot 83, drive 0" command. > 3305 Autochanger "load slot 83, drive 0", status is OK. > 3301 Issuing autochanger "loaded? drive 0" command. > 3302 Autochanger "loaded? drive 0", result is Slot 83. > 3910 Unable to open device "LTO4-0" (/dev/nst0): ERR=dev.c:433 Unable to > open device "LTO4-0" (/dev/nst0): ERR=No medium found > > What the heck does "No medium found" mean? The system knows there is a tape > in drive 0. > If the tape is indeed in drive0 then possibly you may need to add some wait time to the mtx-changer script. There are comments in the script on that.
Also, if you have an autochanger with a barcode you should never label the tapes like this. Use label barcodes instead. This way bacula will know what tapes are in what slots based on the barcode lablels (and the update slots command) instead of having to load every tape to figure out what tapes are in what slots. John ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
